Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Six green 288-pin DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 6400 CL52 1.1V ECC RDIMM memory upgrade

SKU CH-7Y2G-TRVW8

A 576 GB DDR5 registered ECC server memory kit of six 96 GB RDIMMs running at 6400 MT/s with CL52 latency and 1.1 V operation, validated for the Gigabyte MS34-CP0 motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Nog 18 configuraties tonen
  • Massive 576 GB capacity with six 96 GB modules for memory-hungry workloads
  • DDR5 6400 speed and CL52 latency deliver rated throughput out of the box
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's voltage requirement exactly
  • Verified fit for the GIGABYTE MS34-CP0 motherboard with 288-pin RDIMM form factor

Exact-match DDR5 RDIMM kit

This NEMIX RAM kit delivers 576 GB of DDR5 memory across six 96 GB registered DIMMs. It operates at 6400 MT/s with CL52 latency at 1.1 V and includes on-die ECC for error correction. The modules use a 288-pin RDIMM form factor built with major OEM DRAM chips.

Suited for fully populated GIGABYTE MS34-CP0 servers

The kit matches the board’s required registered architecture, rank structure, voltage and timing so every slot can be filled at rated speed. Builders using unbuffered UDIMMs, SODIMMs or modules with different voltages or latencies should look elsewhere because the memory controller will not recognise them.

Straightforward installation with population rules

Each DIMM keys into the 288-pin DDR5 slots and the registered buffer reduces electrical load on the controller. The main risk is ignoring the motherboard manual’s approved population order or maximum capacity per channel, which can prevent the system from posting or cause it to run at reduced speeds.

Pluspunten

  • Massive 576 GB capacity with six 96 GB modules for memory-hungry workloads
  • DDR5 6400 speed and CL52 latency deliver rated throughput out of the box
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 1 V operation matches the motherboard's voltage requirement exactly
  • Verified fit for the GIGABYTE MS34-CP0 motherboard with 288-pin RDIMM form factor

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 576GB DDR5 6400 CL52 1.1V ECC RDIMM kit install in my GIGABYTE MS34-CP0 motherboard?

Yes, the 6x96GB 288-pin Registered DIMM kit is verified for the GIGABYTE MS34-CP0 and matches its DDR5 6400 PC5-51200 2Rx4 1.1V requirements.

Can I mix these 96GB 2Rx4 Registered ECC modules with smaller DDR5 RDIMMs already in my server?

The motherboard manual sets the approved population order; mixing ranks or capacities may limit speed or total capacity, so follow the vendor guide.

How do I confirm the kit runs at DDR5 6400 CL52 with ECC active after installation?

Check BIOS memory info for 6400 MT/s, CL52, 1.1V and ECC enabled, then run a full memory test to verify all 576GB report zero corrected errors.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.