NEMIX RAM
NEMIX RAM 192GB (6x32GB) DDR5 4800 CL40 1.1V ECC RDIMM Cisco UCS X210c M7 memory upgrade
A 192GB DDR5-4800 ECC RDIMM kit of six 32GB modules at CL40 1.1V, validated for the Cisco UCS X210c M7 compute node
- Capacity192GB (6 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity across six 32 GB modules
- DDR5 4800 speed delivers high bandwidth for demanding workloads
- ECC registered design protects data integrity in critical applications
- 10 V operation reduces power draw per module
- Validated for Cisco UCS X210c M7 compute nodes
Cisco UCS X210c M7 memory kit
This 192GB kit contains six 32GB DDR5 4800 CL40 registered ECC RDIMMs built for the Cisco UCS X210c M7 compute node. Each module runs at 1.10V and uses a 1Rx4 organisation on a 288-pin DDR5 form factor. The kit targets IT teams expanding memory capacity in validated Cisco server configurations.
Upgrade from lower-capacity RDIMMs
Replacing smaller DDR5 RDIMMs with this 6x32GB kit raises total system memory to 192GB without changing voltage or registered buffering behaviour. The jump is worthwhile when workloads such as virtualisation, in-memory databases or container density hit the limits of the currently installed capacity.
Verify slot count and population rules
Confirm the X210c M7 chassis has at least six free DDR5 RDIMM slots and review the Cisco memory population guide for supported rank-per-channel limits. Ensure the BIOS version qualifies 4800 MT/s registered ECC modules and that the memory controller accepts 1Rx4 modules at the target speed.
Puncte forte
- 192 GB total capacity across six 32 GB modules
- DDR5 4800 speed delivers high bandwidth for demanding workloads
- ECC registered design protects data integrity in critical applications
- 10 V operation reduces power draw per module
- Validated for Cisco UCS X210c M7 compute nodes
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K6 |
| Capacity | 192GB (6 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 192GB (6X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Întrebări despre acest articol
How many 288-pin DDR5 RDIMM slots does the Cisco UCS X210c M7 need for this 192GB kit?
The kit contains six 32GB modules, so six DDR5 RDIMM slots are required for the full 192GB installation.
What is the correct orientation step when seating these 1.1V ECC registered DIMMs?
Align the module notch with the slot key, press straight down until both side latches click — the registered buffer makes the module taller, so do not angle it during insertion.
When should the six 1Rx4 modules be replaced to maintain ECC integrity?
Replace any module that logs correctable ECC errors in the system event log or fails a full memory diagnostic run during scheduled maintenance windows.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
YourBestChoice
YourBestChoice 34mm ExpressCard to 2 Port USB 3.0 Adapter NEC Chip
10,99 USD
0.00014106BTC
În stoc
SAMSUNG
SAMSUNG M471B5173QH0-YK0 4GB DDR3L PC3-12800 CL11 1.35V 204P SODIMM memory upgrade
14,99 USD
0.00019241BTC
În stoc