We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR5 4800 CL40 1.1V ECC RDIMM Cisco UCS X210c M7 memory upgrade

SKU CH-5TR6-DAGBP

A 192GB DDR5-4800 ECC RDIMM kit of six 32GB modules at CL40 1.1V, validated for the Cisco UCS X210c M7 compute node

  • Capacity192GB (6 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 192 GB total capacity across six 32 GB modules
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • ECC registered design protects data integrity in critical applications
  • 10 V operation reduces power draw per module
  • Validated for Cisco UCS X210c M7 compute nodes

Cisco UCS X210c M7 memory kit

This 192GB kit contains six 32GB DDR5 4800 CL40 registered ECC RDIMMs built for the Cisco UCS X210c M7 compute node. Each module runs at 1.10V and uses a 1Rx4 organisation on a 288-pin DDR5 form factor. The kit targets IT teams expanding memory capacity in validated Cisco server configurations.

Upgrade from lower-capacity RDIMMs

Replacing smaller DDR5 RDIMMs with this 6x32GB kit raises total system memory to 192GB without changing voltage or registered buffering behaviour. The jump is worthwhile when workloads such as virtualisation, in-memory databases or container density hit the limits of the currently installed capacity.

Verify slot count and population rules

Confirm the X210c M7 chassis has at least six free DDR5 RDIMM slots and review the Cisco memory population guide for supported rank-per-channel limits. Ensure the BIOS version qualifies 4800 MT/s registered ECC modules and that the memory controller accepts 1Rx4 modules at the target speed.

Highlights

  • 192 GB total capacity across six 32 GB modules
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • ECC registered design protects data integrity in critical applications
  • 10 V operation reduces power draw per module
  • Validated for Cisco UCS X210c M7 compute nodes

Specifications

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K6
Capacity192GB (6 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content192GB (6X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How many 288-pin DDR5 RDIMM slots does the Cisco UCS X210c M7 need for this 192GB kit?

The kit contains six 32GB modules, so six DDR5 RDIMM slots are required for the full 192GB installation.

What is the correct orientation step when seating these 1.1V ECC registered DIMMs?

Align the module notch with the slot key, press straight down until both side latches click — the registered buffer makes the module taller, so do not angle it during insertion.

When should the six 1Rx4 modules be replaced to maintain ECC integrity?

Replace any module that logs correctable ECC errors in the system event log or fails a full memory diagnostic run during scheduled maintenance windows.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.