BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276635BTC
În stoc
NEMIX RAM
NEMIX RAM 32GB (2x16GB) DDR4 3200 CL22 260-pin SODIMM POSIFLEX ZT-3115 memory upgrade
A 32 GB kit of two 16 GB DDR4 3200 CL22 SODIMM modules for POSIFLEX ZT-3115 terminals
- Capacity32GB (2 x 16GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands POS terminal memory for smoother multitasking
- 3200 MT/s DDR4 speed matches system bus for stable throughput
- CL22 latency keeps response predictable under load
- 20 V operation reduces heat in compact kiosk chassis
- 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots directly
POSIFLEX ZT-3115 memory upgrade
This kit provides 32 GB of DDR4 3200 memory in two 16 GB SODIMM modules built for the POSIFLEX ZT-3115 Haydn ZT Series POS terminal. It runs at 1.2 V with CL22 latency and uses unbuffered non-ECC chips from major OEM suppliers. The 260-pin form factor matches the system's memory slots exactly.
Suits operators upgrading a ZT-3115 terminal
Installers who need the full 32 GB capacity supported by this model will use both slots. Buyers who only need a smaller capacity increase should look at a single-module kit. Systems that require ECC or registered memory cannot use this unbuffered non-ECC kit.
Fits the ZT-3115 without extra parts
The modules plug directly into the terminal's two SODIMM slots and draw standard DDR4 voltage. No heat spreader is included, so airflow inside the chassis handles cooling. Using both slots reaches the kit's 32 GB total and leaves no free slots for further expansion.
Puncte forte
- 32 GB kit expands POS terminal memory for smoother multitasking
- 3200 MT/s DDR4 speed matches system bus for stable throughput
- CL22 latency keeps response predictable under load
- 20 V operation reduces heat in compact kiosk chassis
- 260-pin SODIMM form factor fits POSIFLEX ZT-3115 slots directly
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K2 |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (2X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT |
Întrebări despre acest articol
Does the POSIFLEX ZT-3115 terminal need two free 260-pin DDR4 SODIMM slots to use this 32GB kit?
Yes, the kit contains two 16GB modules that each occupy one 260-pin DDR4 SODIMM slot, so two empty slots are required.
Will these 1.20V CL22 DDR4 3200 modules down-clock if the ZT-3115 platform only supports a lower DDR4 speed?
The modules are rated for DDR4 3200 at 1.20V with CL22 and will run at the highest speed the POSIFLEX ZT-3115 memory controller allows, which may be lower than 3200.
How can I confirm the ZT-3115 recognises the full 32GB after installing the 2Rx8 modules?
Check the system BIOS or the operating-system memory report; both should show 32GB total and the DDR4 3200 speed if the platform supports it.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
