Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR4 RDIMM modules, bare black chips, no heat spreaders, 288-pin edge connectors

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2666 ECC RDIMM CL19 1.2V 288-pin ASRock EPYC

SKU CH-M1PJ-F9AFR

32 GB DDR4 2666 ECC registered RDIMM kit (4 × 8 GB, CL19, 1.2 V) validated for ASRock EPYC server boards

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 32GB 4X8GB

  • 32 GB total capacity for high-density server workloads
  • DDR4 2666 MT/s speed with CL19 latency for responsive data handling
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 2 V operation reduces power draw across all four modules
  • Validated for ASRock EPYC motherboards ensuring drop-in compatibility

DDR4 2666 ECC RDIMM kit

This 32 GB kit contains four 8 GB registered DDR4 modules that run at 2666 MT/s with CL19 latency. It is built for ASRock Rack ROMED8-2T motherboards that support AMD EPYC processors and require ECC registered memory.

32 GB capacity with ECC headroom

Four single-rank 1Rx8 modules provide 32 GB of error-correcting capacity for virtualization, database or file-server workloads. The registered design adds electrical buffering so the memory controller sees one load per module, but the kit stops at 2666 MT/s and CL19 so bandwidth-sensitive tasks may hit a ceiling.

288-pin registered fit for EPYC boards

The modules plug into standard 288-pin DDR4 RDIMM slots and operate at 1.2 V without a heat spreader. They need a motherboard that accepts registered ECC DIMMs and an EPYC-compatible platform; they will not work in consumer desktop boards that require unbuffered non-ECC memory.

Puncte forte

  • 32 GB total capacity for high-density server workloads
  • DDR4 2666 MT/s speed with CL19 latency for responsive data handling
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 2 V operation reduces power draw across all four modules
  • Validated for ASRock EPYC motherboards ensuring drop-in compatibility

Specificații

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the four 8 GB DDR4 2666 ECC RDIMM modules work alongside existing registered memory in an ASRock EPYC server?

Yes, each 1Rx8 module runs at 1.2 V with CL19 timing, so it will operate with other registered DDR4 ECC DIMMs of the same speed and voltage in the same platform.

How can I verify the kit is running at DDR4 2666 with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode; it should report 32 GB total, 2666 MT/s, registered ECC, 1Rx8 organisation and CL19 latency.

What exactly ships in the box and is anything else required to use the memory?

The package contains four 8 GB DDR4 2666 ECC RDIMM modules (part number MR21300-818K4); no additional parts are needed for installation in a compatible ASRock EPYC motherboard.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.