Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Four green DDR4 RDIMM modules, bare black chips, no heat spreaders, 288-pin edge connectors

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR4 2666 ECC RDIMM CL19 1.2V 288-pin ASRock EPYC

SKU CH-M1PJ-F9AFR

32 GB DDR4 2666 ECC registered RDIMM kit (4 × 8 GB, CL19, 1.2 V) validated for ASRock EPYC server boards

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 32GB 4X8GB

  • 32 GB total capacity for high-density server workloads
  • DDR4 2666 MT/s speed with CL19 latency for responsive data handling
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 2 V operation reduces power draw across all four modules
  • Validated for ASRock EPYC motherboards ensuring drop-in compatibility

DDR4 2666 ECC RDIMM kit

This 32 GB kit contains four 8 GB registered DDR4 modules that run at 2666 MT/s with CL19 latency. It is built for ASRock Rack ROMED8-2T motherboards that support AMD EPYC processors and require ECC registered memory.

32 GB capacity with ECC headroom

Four single-rank 1Rx8 modules provide 32 GB of error-correcting capacity for virtualization, database or file-server workloads. The registered design adds electrical buffering so the memory controller sees one load per module, but the kit stops at 2666 MT/s and CL19 so bandwidth-sensitive tasks may hit a ceiling.

288-pin registered fit for EPYC boards

The modules plug into standard 288-pin DDR4 RDIMM slots and operate at 1.2 V without a heat spreader. They need a motherboard that accepts registered ECC DIMMs and an EPYC-compatible platform; they will not work in consumer desktop boards that require unbuffered non-ECC memory.

Puntos fuertes

  • 32 GB total capacity for high-density server workloads
  • DDR4 2666 MT/s speed with CL19 latency for responsive data handling
  • ECC registered RDIMM design protects data integrity in mission-critical systems
  • 2 V operation reduces power draw across all four modules
  • Validated for ASRock EPYC motherboards ensuring drop-in compatibility

Especificaciones

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Will the four 8 GB DDR4 2666 ECC RDIMM modules work alongside existing registered memory in an ASRock EPYC server?

Yes, each 1Rx8 module runs at 1.2 V with CL19 timing, so it will operate with other registered DDR4 ECC DIMMs of the same speed and voltage in the same platform.

How can I verify the kit is running at DDR4 2666 with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode; it should report 32 GB total, 2666 MT/s, registered ECC, 1Rx8 organisation and CL19 latency.

What exactly ships in the box and is anything else required to use the memory?

The package contains four 8 GB DDR4 2666 ECC RDIMM modules (part number MR21300-818K4); no additional parts are needed for installation in a compatible ASRock EPYC motherboard.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.