BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278589BTC
În stoc
NEMIX RAM
NEMIX RAM 32GB DDR4 2666 PC4-21300 CL19 1.2V 2Rx8 260-pin SODIMM SuperMicro compatible
A 32 GB DDR4 SODIMM running at 2666 MT/s with CL19 timing for SuperMicro systems
- Capacity32GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB capacity expands server memory headroom
- DDR4 2666 speed delivers PC4-21300 bandwidth
- CL19 latency at 1.20 V keeps power draw low
- 2Rx8 260-pin SODIMM fits SuperMicro MEM-DR432L-SL01-SO26
- Major OEM Samsung Micron Hynix chips ensure module reliability
Capacity and form factor
This is a 32GB DDR4 2666 SODIMM module built to the PC4-21300 standard with a 260-pin layout. It runs at 1.2V with a CAS latency of CL19 and uses a 2Rx8 rank configuration without a heat spreader.
SuperMicro system builders and IT maintainers
The module is validated for SuperMicro platforms that accept non-ECC unbuffered DDR4 SODIMMs at this speed and voltage. It will not suit systems that require ECC, registered DIMMs, a different pin count, or a voltage other than 1.2V.
Single-rank versus dual-rank requirement
The 2Rx8 organization means the stick presents two ranks to the memory controller; some SuperMicro boards only support single-rank SODIMMs, so verify the motherboard qualification list before ordering.
Puncte forte
- 32 GB capacity expands server memory headroom
- DDR4 2666 speed delivers PC4-21300 bandwidth
- CL19 latency at 1.20 V keeps power draw low
- 2Rx8 260-pin SODIMM fits SuperMicro MEM-DR432L-SL01-SO26
- Major OEM Samsung Micron Hynix chips ensure module reliability
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS21300-328K1 |
| Capacity | 32GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
Will this 260-pin SODIMM fit my Supermicro server board?
Yes — it is a 260-pin DDR4 SODIMM built to match Supermicro MEM-DR432L-SL01-SO26 and uses the standard SODIMM slot found on compatible Supermicro systems.
What is the correct way to seat the module so it locks in place?
Align the notch on the module with the key in the slot, press firmly until the side clips click, and verify both clips are fully engaged; a partial seat will cause boot failures.
Does this stick need any periodic cleaning or firmware updates?
No — memory modules have no moving parts and require no scheduled cleaning or firmware updates; they remain in service until a capacity upgrade or a rare hardware fault occurs.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
