We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 260-pin DDR4 SODIMM module, no heat spreader, single 32GB stick

NEMIX RAM

NEMIX RAM 32GB DDR4 2666 PC4-21300 CL19 1.2V 2Rx8 260-pin SODIMM SuperMicro compatible

SKU CH-0SRQ-1MET8

A 32 GB DDR4 SODIMM running at 2666 MT/s with CL19 timing for SuperMicro systems

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB capacity expands server memory headroom
  • DDR4 2666 speed delivers PC4-21300 bandwidth
  • CL19 latency at 1.20 V keeps power draw low
  • 2Rx8 260-pin SODIMM fits SuperMicro MEM-DR432L-SL01-SO26
  • Major OEM Samsung Micron Hynix chips ensure module reliability

Capacity and form factor

This is a 32GB DDR4 2666 SODIMM module built to the PC4-21300 standard with a 260-pin layout. It runs at 1.2V with a CAS latency of CL19 and uses a 2Rx8 rank configuration without a heat spreader.

SuperMicro system builders and IT maintainers

The module is validated for SuperMicro platforms that accept non-ECC unbuffered DDR4 SODIMMs at this speed and voltage. It will not suit systems that require ECC, registered DIMMs, a different pin count, or a voltage other than 1.2V.

Single-rank versus dual-rank requirement

The 2Rx8 organization means the stick presents two ranks to the memory controller; some SuperMicro boards only support single-rank SODIMMs, so verify the motherboard qualification list before ordering.

Highlights

  • 32 GB capacity expands server memory headroom
  • DDR4 2666 speed delivers PC4-21300 bandwidth
  • CL19 latency at 1.20 V keeps power draw low
  • 2Rx8 260-pin SODIMM fits SuperMicro MEM-DR432L-SL01-SO26
  • Major OEM Samsung Micron Hynix chips ensure module reliability

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-328K1
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Will this 260-pin SODIMM fit my Supermicro server board?

Yes — it is a 260-pin DDR4 SODIMM built to match Supermicro MEM-DR432L-SL01-SO26 and uses the standard SODIMM slot found on compatible Supermicro systems.

What is the correct way to seat the module so it locks in place?

Align the notch on the module with the key in the slot, press firmly until the side clips click, and verify both clips are fully engaged; a partial seat will cause boot failures.

Does this stick need any periodic cleaning or firmware updates?

No — memory modules have no moving parts and require no scheduled cleaning or firmware updates; they remain in service until a capacity upgrade or a rare hardware fault occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.