Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 576GB DDR5 5600 CL46 2Rx4 ECC RDIMM 6x96GB memory upgrade

SKU CH-W71W-H6AG3

A 576 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM kit of six 96 GB modules built for the Supermicro H14DST-F motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Vedeți celelalte 30 configurații
  • 576 GB total capacity from six 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches the controller's rated timing
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation reduces power draw across fully populated slots
  • Verified fit for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor

576GB DDR5 ECC RDIMM Kit

This 576GB kit contains six 96GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H14DST-F motherboard. It targets administrators who need maximum supported capacity on that platform and require error-correcting, registered memory for production workloads. The modules match the board's 288-pin RDIMM requirement and 1.1V operating voltage exactly. Buyers needing UDIMMs, SODIMMs, or non-ECC memory cannot use this kit.

Capacity and headroom

Six 96GB modules populate every slot for a total of 576GB, enabling large in-memory databases, virtualization clusters, and high-thread-count compute jobs. The 2Rx4 organization and registered buffer let the memory controller drive all slots at the rated DDR5 5600 speed without signal degradation. Workloads that exceed this capacity or require faster than CL46 latency will hit the hardware ceiling of this configuration.

Build and daily implications

Modules use major OEM Samsung, Micron, or Hynix chips and ship without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM form factor locks into the H14DST-F's registered DIMM slots in the population order the manual specifies. ECC corrects single-bit errors on the fly, preventing silent data corruption during continuous operation.

Puncte forte

  • 576 GB total capacity from six 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches the controller's rated timing
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation reduces power draw across fully populated slots
  • Verified fit for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will this 576GB DDR5 5600 2Rx4 RDIMM kit run at full speed alongside existing DDR5 4800 modules in my Supermicro H14DST-F?

Mixing different DDR5 speeds forces all channels to the lowest common rate. For full 5600 MT/s operation, populate every slot with matched 5600 modules.

How can I confirm the kit is recognised at 576GB with ECC active after installation?

Check the BIOS memory summary for 576GB total, 5600 MT/s speed, and ECC status enabled. Run a memory diagnostic to verify error correction is functional.

Does the box include only the six 96GB RDIMMs or are heat spreaders and installation tools supplied too?

The package contains the six 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM modules. No heat spreaders or tools are included.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.