我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 576GB DDR5 5600 CL46 2Rx4 ECC RDIMM 6x96GB memory upgrade

SKU CH-W71W-H6AG3

A 576 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM kit of six 96 GB modules built for the Supermicro H14DST-F motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 576 GB total capacity from six 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches the controller's rated timing
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation reduces power draw across fully populated slots
  • Verified fit for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor

576GB DDR5 ECC RDIMM Kit

This 576GB kit contains six 96GB DDR5 5600 Registered ECC RDIMMs built for the Supermicro H14DST-F motherboard. It targets administrators who need maximum supported capacity on that platform and require error-correcting, registered memory for production workloads. The modules match the board's 288-pin RDIMM requirement and 1.1V operating voltage exactly. Buyers needing UDIMMs, SODIMMs, or non-ECC memory cannot use this kit.

Capacity and headroom

Six 96GB modules populate every slot for a total of 576GB, enabling large in-memory databases, virtualization clusters, and high-thread-count compute jobs. The 2Rx4 organization and registered buffer let the memory controller drive all slots at the rated DDR5 5600 speed without signal degradation. Workloads that exceed this capacity or require faster than CL46 latency will hit the hardware ceiling of this configuration.

Build and daily implications

Modules use major OEM Samsung, Micron, or Hynix chips and ship without heat spreaders, relying on server chassis airflow for cooling. The 288-pin RDIMM form factor locks into the H14DST-F's registered DIMM slots in the population order the manual specifies. ECC corrects single-bit errors on the fly, preventing silent data corruption during continuous operation.

商品特色

  • 576 GB total capacity from six 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matches the controller's rated timing
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation reduces power draw across fully populated slots
  • Verified fit for Supermicro H14DST-F motherboard with 288-pin RDIMM form factor

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will this 576GB DDR5 5600 2Rx4 RDIMM kit run at full speed alongside existing DDR5 4800 modules in my Supermicro H14DST-F?

Mixing different DDR5 speeds forces all channels to the lowest common rate. For full 5600 MT/s operation, populate every slot with matched 5600 modules.

How can I confirm the kit is recognised at 576GB with ECC active after installation?

Check the BIOS memory summary for 576GB total, 5600 MT/s speed, and ECC status enabled. Run a memory diagnostic to verify error correction is functional.

Does the box include only the six 96GB RDIMMs or are heat spreaders and installation tools supplied too?

The package contains the six 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM modules. No heat spreaders or tools are included.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。