Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM Server Memory

SKU CH-KTBX-6ERAR

A 64 GB DDR5 ECC registered dual-rank kit with CL40 timing and 1.1 V operation for Dell Precision 5860 workstations

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • CL40 latency at 1.10 V registered operation
  • 2Rx4 ECC RDIMM for server data integrity
  • 288-pin form factor fits Dell Precision 5860 Tower Workstation

Dell Precision 5860 Compatible Kit

This 64 GB kit contains two 32 GB DDR5 RDIMM modules built for the Dell Precision 5860 Tower Workstation. Registered ECC operation and a 2Rx4 organisation provide the data integrity required by professional server and workstation workloads.

Thermals Noise and Power

Each module runs at 1.1 V with a CL40 latency at the standard 4800 MT/s speed. The low-voltage DDR5 design limits heat output and power draw, while the absence of a heat spreader keeps the profile slim for dense server chassis airflow.

Registered ECC Changes Reliability

On-die ECC and register buffering correct single-bit errors and reduce electrical load on the memory controller. This combination improves uptime for critical applications without requiring additional software or configuration steps.

Puncte forte

  • 64 GB total capacity from two 32 GB modules
  • DDR5 4800 speed with PC5-38400 bandwidth rating
  • CL40 latency at 1.10 V registered operation
  • 2Rx4 ECC RDIMM for server data integrity
  • 288-pin form factor fits Dell Precision 5860 Tower Workstation

Specificații

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-324K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Întrebări despre acest articol

How do I install the 288-pin DDR5 RDIMM modules in my Dell Precision 5860 Tower Workstation, and which step is most often missed?

Power off the workstation, open the chassis, align each module notch with the slot key, press firmly until the latches click, then verify in BIOS that both 32GB sticks register at 4800 MT/s; the step most often missed is fully seating both latches on every module.

What maintenance or replacement will this ECC registered kit need over its service life?

No routine maintenance is required; if a correctable error count rises or a module fails, replace the affected 32GB stick with an identical DDR5 4800 CL40 1.1V 2Rx4 RDIMM to keep the kit matched.

What limit appears first when the memory runs sustained workloads at the rated 4800 speed?

The CL40 latency at 1.1V is the primary timing constraint; sustained throughput is bounded by the DDR5 4800 transfer rate and the registered buffer adding one cycle per command.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.