Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 ECC RDIMM CL15 1.2V 288-Pin 1Rx4 SuperMicro MEM-DR480L-SL01-ER21 memory upgrade

SKU CH-26WK-3T67B

8GB DDR4 2133 ECC registered DIMM for Supermicro servers, CL15 at 1.2V

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy workloads
  • 20 V operation reduces power draw
  • CL15 latency at 2133 MHz speed
  • Validated for Supermicro system compatibility

SuperMicro DDR4 2133 ECC RDIMM 8GB

This registered DDR4 module delivers 8 GB of error-correcting memory at 2133 MT/s with CL15 latency and 1.20 V operation. It targets administrators upgrading SuperMicro servers or workstations that require registered ECC DIMMs for data integrity.

288-pin registered DIMM for server boards

The 288-pin RDIMM fits DDR4 server motherboards that support registered memory and a 1Rx4 rank configuration. ECC and registered buffering reduce electrical load on the memory controller, freeing slots for additional modules in multi-channel populations.

Samsung Micron Hynix chips tested under load

Major OEM DRAM from Samsung, Micron or Hynix is stress-tested at rated speed before shipment. The validated component mix aims to eliminate early-life failures in mission-critical deployments.

Puncte forte

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy workloads
  • 20 V operation reduces power draw
  • CL15 latency at 2133 MHz speed
  • Validated for Supermicro system compatibility

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2133MHZ ECC RDIMM Registered Server Memory
Part NumberMR17000-814K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL15
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory

Întrebări despre acest articol

Will the CL15 latency hold up during sustained server workloads?

The module runs at DDR4 2133 with CL15 timing, so latency stays at the rated value as long as the system operates within spec.

Does the registered ECC design run hotter or draw more power than unbuffered sticks?

Registered ECC DIMMs add a small register load, but at 1.2 V the power draw and heat remain comparable to standard DDR4 modules.

My Supermicro board uses 288-pin DDR4 slots — is that the only requirement?

Yes, the 288-pin DDR4 RDIMM form factor matches the slot; the board must also support registered ECC memory.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.