SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497778BTC
재고 있음
NEMIX RAM
NEMIX RAM 8GB DDR4 2133 ECC RDIMM CL15 1.2V 288-Pin 1Rx4 SuperMicro MEM-DR480L-SL01-ER21 memory upgrade
8GB DDR4 2133 ECC registered DIMM for Supermicro servers, CL15 at 1.2V
- Capacity8GB
- SpeedDDR4 2133 (PC4 17000)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in servers
- Registered design stabilises heavy workloads
- 20 V operation reduces power draw
- CL15 latency at 2133 MHz speed
- Validated for Supermicro system compatibility
SuperMicro DDR4 2133 ECC RDIMM 8GB
This registered DDR4 module delivers 8 GB of error-correcting memory at 2133 MT/s with CL15 latency and 1.20 V operation. It targets administrators upgrading SuperMicro servers or workstations that require registered ECC DIMMs for data integrity.
288-pin registered DIMM for server boards
The 288-pin RDIMM fits DDR4 server motherboards that support registered memory and a 1Rx4 rank configuration. ECC and registered buffering reduce electrical load on the memory controller, freeing slots for additional modules in multi-channel populations.
Samsung Micron Hynix chips tested under load
Major OEM DRAM from Samsung, Micron or Hynix is stress-tested at rated speed before shipment. The validated component mix aims to eliminate early-life failures in mission-critical deployments.
주요 특징
- ECC protection prevents data corruption in servers
- Registered design stabilises heavy workloads
- 20 V operation reduces power draw
- CL15 latency at 2133 MHz speed
- Validated for Supermicro system compatibility
사양
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2133MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR17000-814K1 |
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL15 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2133MHZ PC4-17000 1Rx4 1.2V CL15 288-PIN ECC RDIMM Registered Server Memory |
이 상품에 대한 질문
Will the CL15 latency hold up during sustained server workloads?
The module runs at DDR4 2133 with CL15 timing, so latency stays at the rated value as long as the system operates within spec.
Does the registered ECC design run hotter or draw more power than unbuffered sticks?
Registered ECC DIMMs add a small register load, but at 1.2 V the power draw and heat remain comparable to standard DDR4 modules.
My Supermicro board uses 288-pin DDR4 slots — is that the only requirement?
Yes, the 288-pin DDR4 RDIMM form factor matches the slot; the board must also support registered ECC memory.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
