NEMIX RAM
NEMIX RAM 8GB DDR4 2400 CL17 260-pin SODIMM POSIFLEX XT-6315E memory upgrade
8 GB DDR4 2400 SODIMM for POSIFLEX XT-6315E terminals, CL17, 1.20 V, 260-pin unbuffered non-ECC
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity expands POS terminal multitasking headroom
- DDR4 2400 MHz speed matches system memory bus
- CL17 latency and 1.2 V voltage keep timing stable
- 260-pin SODIMM form factor fits the XT-6315E slot
- Built with major OEM chips for reliable operation
System-specific memory for POSIFLEX terminals
This 8 GB DDR4 SODIMM is built for the POSIFLEX XT-6315E JIVA fanless point-of-sale terminal. It delivers a straight-forward capacity increase for retailers, hospitality operators or integrators who need reliable memory in a compact, fanless chassis.
Unbuffered non-ECC module with 260-pin layout
The stick uses a standard 260-pin SODIMM edge connector and 2Rx8 organisation, so it seats directly into the terminal’s single memory slot without adapters. Major-brand Samsung, Micron or Hynix chips are used, and the module carries no heat spreader, keeping the profile low for tight enclosures.
Low-voltage operation at CL17 latency
Rated at 1.20 V and DDR4 2400 (PC4-19200) with CAS latency 17, the module runs cool and draws minimal power — an advantage in fanless designs where every watt adds to the thermal load. No moving parts mean silent operation under continuous retail workloads.
Puncte forte
- 8 GB capacity expands POS terminal multitasking headroom
- DDR4 2400 MHz speed matches system memory bus
- CL17 latency and 1.2 V voltage keep timing stable
- 260-pin SODIMM form factor fits the XT-6315E slot
- Built with major OEM chips for reliable operation
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
What speed does the DDR4 2400 SODIMM run at in the POSIFLEX XT-6315E?
The module operates at DDR4 2400 (PC4-19200) with CL17 latency at 1.20 V, so the terminal's memory controller will run it at that rated speed.
Does the 260-pin SODIMM fit the POSIFLEX XT-6315E's memory slot?
Yes, it is a standard 260-pin DDR4 SODIMM designed for the XT-6315E's SO-DIMM socket, with no heat spreader to interfere with the fanless chassis.
How is the module installed and what step is often missed?
Power off the terminal, open the access panel, align the notch on the 260-pin edge connector, insert at an angle, then press down until both retention clips click — the step often missed is fully seating both clips so the module locks flat.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 USD
0.00134392BTC
În stoc
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 USD
0.00010228BTC
În stoc