We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black chips, gold edge connector, thin rectangular SODIMM module

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 260-pin SODIMM POSIFLEX XT-6315E memory upgrade

SKU CH-QPBJ-4ZTJH

8 GB DDR4 2400 SODIMM for POSIFLEX XT-6315E terminals, CL17, 1.20 V, 260-pin unbuffered non-ECC

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2400 MHz speed matches system memory bus
  • CL17 latency and 1.2 V voltage keep timing stable
  • 260-pin SODIMM form factor fits the XT-6315E slot
  • Built with major OEM chips for reliable operation

System-specific memory for POSIFLEX terminals

This 8 GB DDR4 SODIMM is built for the POSIFLEX XT-6315E JIVA fanless point-of-sale terminal. It delivers a straight-forward capacity increase for retailers, hospitality operators or integrators who need reliable memory in a compact, fanless chassis.

Unbuffered non-ECC module with 260-pin layout

The stick uses a standard 260-pin SODIMM edge connector and 2Rx8 organisation, so it seats directly into the terminal’s single memory slot without adapters. Major-brand Samsung, Micron or Hynix chips are used, and the module carries no heat spreader, keeping the profile low for tight enclosures.

Low-voltage operation at CL17 latency

Rated at 1.20 V and DDR4 2400 (PC4-19200) with CAS latency 17, the module runs cool and draws minimal power — an advantage in fanless designs where every watt adds to the thermal load. No moving parts mean silent operation under continuous retail workloads.

Highlights

  • 8 GB capacity expands POS terminal multitasking headroom
  • DDR4 2400 MHz speed matches system memory bus
  • CL17 latency and 1.2 V voltage keep timing stable
  • 260-pin SODIMM form factor fits the XT-6315E slot
  • Built with major OEM chips for reliable operation

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What speed does the DDR4 2400 SODIMM run at in the POSIFLEX XT-6315E?

The module operates at DDR4 2400 (PC4-19200) with CL17 latency at 1.20 V, so the terminal's memory controller will run it at that rated speed.

Does the 260-pin SODIMM fit the POSIFLEX XT-6315E's memory slot?

Yes, it is a standard 260-pin DDR4 SODIMM designed for the XT-6315E's SO-DIMM socket, with no heat spreader to interfere with the fanless chassis.

How is the module installed and what step is often missed?

Power off the terminal, open the access panel, align the notch on the 260-pin edge connector, insert at an angle, then press down until both retention clips click — the step often missed is fully seating both clips so the module locks flat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.