Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 SODIMM for POSIFLEX XT-6517 JIVA memory upgrade

SKU CH-VV4S-29CQY

An 8 GB DDR4 2400 CL17 SODIMM built for the POSIFLEX XT-6517 JIVA terminal

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands terminal memory for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX XT-6517 JIVA specifications
  • CL17 latency and 1.2 V voltage keep power draw low
  • 260-pin SODIMM form factor fits the system slot directly
  • Major OEM chips from Samsung, Micron or Hynix ensure stable operation

POSIFLEX XT-6517 JIVA memory upgrade

This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-6517 JIVA high-end fanless point-of-sale terminal. It targets system integrators and IT technicians who need a validated module for that exact platform. The part is new and unbuffered, matching the terminal’s original specification.

DDR4 2400 CL17 260-pin specification

The module runs at DDR4 2400 (PC4-19200) with a CAS latency of 17 and operates at 1.20 V. It uses a 2Rx8 rank configuration on a 260-pin SODIMM form factor. This combination of speed, voltage, latency and pin count is the single factor that determines whether the terminal will recognise and stabilise the memory.

Straightforward SODIMM installation

Installation follows the standard SODIMM procedure: power down the terminal, open the memory compartment, align the notch on the 260-pin module and press firmly until the retention clips engage. The only common issue is inserting the stick at an angle or not seating it fully, which causes a no-post condition. Re-seating the module resolves this in nearly every case.

Puncte forte

  • 8 GB capacity expands terminal memory for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX XT-6517 JIVA specifications
  • CL17 latency and 1.2 V voltage keep power draw low
  • 260-pin SODIMM form factor fits the system slot directly
  • Major OEM chips from Samsung, Micron or Hynix ensure stable operation

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

What does DDR4 2400 CL17 mean for daily use on the POSIFLEX XT-6517 JIVA?

The module runs at DDR4 2400 with CAS latency 17, giving the terminal a standard-speed memory path for point-of-sale workloads.

How does the 260-pin SODIMM interface limit what this module can do?

The 260-pin DDR4 SODIMM slot caps the module at DDR4 2400 and 1.20 V, so it cannot run at higher DDR4 speeds or voltages.

Will this stick fit inside the POSIFLEX XT-6517 JIVA without extra hardware?

Yes, it is a 260-pin SODIMM with no heat spreader, designed to slot directly into the terminal's memory socket.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.