NEMIX RAM
NEMIX RAM 8GB DDR4 2400 CL17 SODIMM for POSIFLEX XT-6517 JIVA memory upgrade
An 8 GB DDR4 2400 CL17 SODIMM built for the POSIFLEX XT-6517 JIVA terminal
- Capacity8GB
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8 GB capacity expands terminal memory for smoother multitasking
- DDR4 2400 speed matches POSIFLEX XT-6517 JIVA specifications
- CL17 latency and 1.2 V voltage keep power draw low
- 260-pin SODIMM form factor fits the system slot directly
- Major OEM chips from Samsung, Micron or Hynix ensure stable operation
POSIFLEX XT-6517 JIVA memory upgrade
This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX XT-6517 JIVA high-end fanless point-of-sale terminal. It targets system integrators and IT technicians who need a validated module for that exact platform. The part is new and unbuffered, matching the terminal’s original specification.
DDR4 2400 CL17 260-pin specification
The module runs at DDR4 2400 (PC4-19200) with a CAS latency of 17 and operates at 1.20 V. It uses a 2Rx8 rank configuration on a 260-pin SODIMM form factor. This combination of speed, voltage, latency and pin count is the single factor that determines whether the terminal will recognise and stabilise the memory.
Straightforward SODIMM installation
Installation follows the standard SODIMM procedure: power down the terminal, open the memory compartment, align the notch on the 260-pin module and press firmly until the retention clips engage. The only common issue is inserting the stick at an angle or not seating it fully, which causes a no-post condition. Re-seating the module resolves this in nearly every case.
Najważniejsze cechy
- 8 GB capacity expands terminal memory for smoother multitasking
- DDR4 2400 speed matches POSIFLEX XT-6517 JIVA specifications
- CL17 latency and 1.2 V voltage keep power draw low
- 260-pin SODIMM form factor fits the system slot directly
- Major OEM chips from Samsung, Micron or Hynix ensure stable operation
Specyfikacja
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-828K1 |
| Capacity | 8GB |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM |
Pytania dotyczące tego produktu
What does DDR4 2400 CL17 mean for daily use on the POSIFLEX XT-6517 JIVA?
The module runs at DDR4 2400 with CAS latency 17, giving the terminal a standard-speed memory path for point-of-sale workloads.
How does the 260-pin SODIMM interface limit what this module can do?
The 260-pin DDR4 SODIMM slot caps the module at DDR4 2400 and 1.20 V, so it cannot run at higher DDR4 speeds or voltages.
Will this stick fit inside the POSIFLEX XT-6517 JIVA without extra hardware?
Yes, it is a 260-pin SODIMM with no heat spreader, designed to slot directly into the terminal's memory socket.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



