Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2933MHz PC4-23400 1Rx8 CL21 288-PIN ECC UDIMM memory upgrade

SKU CH-BH61-B60BV

8GB DDR4 2933MHz ECC UDIMM adds error-correcting memory to Supermicro X12SAE and X12SCA-F motherboards

  • Capacity8GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Size 8GB

  • ECC protects data integrity by correcting single-bit errors on the fly
  • 8 GB DDR4-2933 PC4-23400 matches Supermicro X12SAE and X12SCA-F spec exactly
  • 1Rx8 unbuffered UDIMM installs directly without registered or SODIMM mismatch
  • CL21 timing at 1.2 V runs at rated speed without manual tuning
  • Major OEM Samsung Micron Hynix chips deliver consistent reliability

8GB DDR4 ECC UDIMM for Supermicro Boards

This 8GB DDR4 2933MHz ECC unbuffered UDIMM is built for Supermicro X12SAE and X12SCA-F motherboards. It delivers 8GB of error-correcting memory at 1.2V with CL21 latency. The 288-pin module matches the exact rank and timing the platform expects for full-speed operation.

Suited for ECC server upgrades.

This module suits administrators upgrading Supermicro X12SAE or X12SCA-F systems that require unbuffered ECC UDIMMs. Builders needing registered DIMMs, SODIMM form factors, or non-ECC memory for consumer platforms should look elsewhere. Systems not validated for 1Rx8 DDR4-2933 ECC UDIMMs will not support this part.

288-pin DDR4 ECC UDIMM form factor

The single decisive specification is the 288-pin DDR4 ECC UDIMM form factor. Only motherboards wired for unbuffered ECC UDIMMs at DDR4-2933 will recognise this module at its rated 2933MHz speed and 8GB capacity. Any other slot type — RDIMM, SODIMM or non-ECC — will reject it physically or electrically.

Puncte forte

  • ECC protects data integrity by correcting single-bit errors on the fly
  • 8 GB DDR4-2933 PC4-23400 matches Supermicro X12SAE and X12SCA-F spec exactly
  • 1Rx8 unbuffered UDIMM installs directly without registered or SODIMM mismatch
  • CL21 timing at 1.2 V runs at rated speed without manual tuning
  • Major OEM Samsung Micron Hynix chips deliver consistent reliability

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME23400-818K1
Capacity8GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does my Supermicro X12SAE motherboard need a free 288-pin DDR4 UDIMM slot for this 8GB ECC module?

Yes. The module is a 288-pin DDR4 ECC UDIMM that fits the standard unbuffered DIMM slots on the X12SAE or X12SCA-F.

Can I mix this 1Rx8 CL21 stick with existing 2Rx8 DDR4-2933 ECC UDIMMs on the same board?

The X12SAE and X12SCA-F support mixed-rank populations; install modules in the order the manual specifies and the system will run at the lowest common speed and latency.

How can I confirm the module is running at DDR4-2933 with ECC active after installation?

Enter the BIOS or use a tool such as dmidecode; it should report 2933 MT/s, CL21, 1.20 V and ECC enabled for the new DIMM.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.