Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular SODIMM module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-pin SODIMM for POSIFLEX JK-3232 Cachet Series Kiosk memory upgrade

SKU CH-7QX6-S5HJP

8GB DDR4 3200 SODIMM module with CL22 latency and 1.2V operation for POSIFLEX JK-3232 Cachet Series kiosk upgrades

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps timing within spec
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX JK-3232 slot

Targeted Kiosk Upgrade

This 8 GB DDR4 3200 SODIMM is built specifically for the POSIFLEX JK-3232 Cachet Series kiosk. It delivers 8 GB of non-ECC unbuffered memory at 1.20 V with CL22 latency. The 260-pin form factor fits the system's SO-DIMM slot directly. IT teams use it to add capacity to point-of-sale terminals that run long shifts.

Replaces Slower or Smaller Modules

The module upgrades from lower-speed DDR4 or smaller-capacity sticks that limit multitasking in retail environments. The jump is worth it when the kiosk shows lag during peak checkout periods or when the current configuration cannot hold the required OS image and application set simultaneously. PC4-25600 bandwidth matches the platform's memory controller.

Fits the JK-3232 Slot

Installation uses the single SO-DIMM socket inside the kiosk chassis; no heat spreader means it clears tight clearances. The 2Rx8 organisation works with the board's memory topology without configuration changes. It frees the technician from sourcing generic modules that may fail validation on POSIFLEX hardware.

Puncte forte

  • 8GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps timing within spec
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX JK-3232 slot

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Will the 260-pin DDR4 SODIMM fit the POSIFLEX JK-3232 Cachet Series kiosk?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX JK-3232 Cachet Series kiosk, so it matches the slot and form factor exactly.

What is the correct way to install the module, and which step is often missed?

Power off the kiosk and unplug it, open the memory cover, align the notch on the 260-pin SODIMM with the slot key, press firmly until the side clips click, then replace the cover before powering on.

When will this 8 GB DDR4 3200 CL22 module need replacement?

The memory has no moving parts and requires no scheduled replacement; swap it only if a fault appears or the kiosk needs more than 8 GB capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.