暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-pin SODIMM for POSIFLEX JK-3232 Cachet Series Kiosk memory upgrade

SKU CH-7QX6-S5HJP

8GB DDR4 3200 SODIMM module with CL22 latency and 1.2V operation for POSIFLEX JK-3232 Cachet Series kiosk upgrades

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps timing within spec
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX JK-3232 slot

Targeted Kiosk Upgrade

This 8 GB DDR4 3200 SODIMM is built specifically for the POSIFLEX JK-3232 Cachet Series kiosk. It delivers 8 GB of non-ECC unbuffered memory at 1.20 V with CL22 latency. The 260-pin form factor fits the system's SO-DIMM slot directly. IT teams use it to add capacity to point-of-sale terminals that run long shifts.

Replaces Slower or Smaller Modules

The module upgrades from lower-speed DDR4 or smaller-capacity sticks that limit multitasking in retail environments. The jump is worth it when the kiosk shows lag during peak checkout periods or when the current configuration cannot hold the required OS image and application set simultaneously. PC4-25600 bandwidth matches the platform's memory controller.

Fits the JK-3232 Slot

Installation uses the single SO-DIMM socket inside the kiosk chassis; no heat spreader means it clears tight clearances. The 2Rx8 organisation works with the board's memory topology without configuration changes. It frees the technician from sourcing generic modules that may fail validation on POSIFLEX hardware.

特長

  • 8GB capacity expands kiosk multitasking headroom
  • DDR4 3200 speed matches system memory bus
  • CL22 latency keeps timing within spec
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits POSIFLEX JK-3232 slot

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will the 260-pin DDR4 SODIMM fit the POSIFLEX JK-3232 Cachet Series kiosk?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX JK-3232 Cachet Series kiosk, so it matches the slot and form factor exactly.

What is the correct way to install the module, and which step is often missed?

Power off the kiosk and unplug it, open the memory cover, align the notch on the 260-pin SODIMM with the slot key, press firmly until the side clips click, then replace the cover before powering on.

When will this 8 GB DDR4 3200 CL22 module need replacement?

The memory has no moving parts and requires no scheduled replacement; swap it only if a fault appears or the kiosk needs more than 8 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。