Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM POSIFLEX EK-1532 memory upgrade

SKU CH-ZPFN-XK7R0

8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM built for POSIFLEX EK-1532 kiosks

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB DDR4 3200 module boosts POS terminal responsiveness
  • CL22 timing and 1.20V voltage keep power draw low
  • 2Rx8 rank on 260-pin SODIMM fits POSIFLEX EK-1532 kiosk
  • Major OEM chips from Samsung, Micron or Hynix ensure stability
  • Non-ECC unbuffered design simplifies drop-in installation

POSIFLEX EK-1532 memory upgrade

This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX EK-1532 Mercury Series kiosk. It targets technicians and resellers who need a direct-fit module to restore or expand memory in that exact point-of-sale platform.

1.2 V operation with no heat spreader

Running at 1.20 V and CL22 latency, the unbuffered non-ECC module draws minimal power and produces no audible noise because it has no moving parts. The low-voltage design keeps thermals negligible inside the sealed kiosk chassis.

Single-module kit simplifies installation

The package contains one 260-pin 2Rx8 stick, so there is no need to match pairs or populate specific slots. Technicians can swap the module in minutes using only the kiosk service manual, reducing on-site service time.

Puncte forte

  • 8GB DDR4 3200 module boosts POS terminal responsiveness
  • CL22 timing and 1.20V voltage keep power draw low
  • 2Rx8 rank on 260-pin SODIMM fits POSIFLEX EK-1532 kiosk
  • Major OEM chips from Samsung, Micron or Hynix ensure stability
  • Non-ECC unbuffered design simplifies drop-in installation

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

How do I install this 260-pin SODIMM in the POSIFLEX EK-1532 and what step is often missed?

Power off the kiosk, open the memory compartment, align the notch on the 260-pin module with the slot key, press firmly until both side clips click, then verify 3200 speed in BIOS.

What maintenance or replacement will this DDR4 8GB module need over time?

No scheduled maintenance is required; the module has no heat spreader and runs at 1.20 V, so replacement is only needed if a fault appears or capacity must increase.

What limit appears first when this CL22 2Rx8 memory runs sustained workloads?

The CAS latency of 22 cycles at 3200 MT/s sets the response-time floor, so latency-sensitive tasks hit that timing ceiling before bandwidth saturates.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.