BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00280732BTC
Auf Lager
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 2Rx8 1.2V 260-Pin SODIMM POSIFLEX EK-1532 memory upgrade
8GB DDR4 3200 CL22 2Rx8 1.2V 260-pin SODIMM built for POSIFLEX EK-1532 kiosks
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB DDR4 3200 module boosts POS terminal responsiveness
- CL22 timing and 1.20V voltage keep power draw low
- 2Rx8 rank on 260-pin SODIMM fits POSIFLEX EK-1532 kiosk
- Major OEM chips from Samsung, Micron or Hynix ensure stability
- Non-ECC unbuffered design simplifies drop-in installation
POSIFLEX EK-1532 memory upgrade
This 8 GB DDR4 SODIMM is built specifically for the POSIFLEX EK-1532 Mercury Series kiosk. It targets technicians and resellers who need a direct-fit module to restore or expand memory in that exact point-of-sale platform.
1.2 V operation with no heat spreader
Running at 1.20 V and CL22 latency, the unbuffered non-ECC module draws minimal power and produces no audible noise because it has no moving parts. The low-voltage design keeps thermals negligible inside the sealed kiosk chassis.
Single-module kit simplifies installation
The package contains one 260-pin 2Rx8 stick, so there is no need to match pairs or populate specific slots. Technicians can swap the module in minutes using only the kiosk service manual, reducing on-site service time.
Besonderheiten
- 8GB DDR4 3200 module boosts POS terminal responsiveness
- CL22 timing and 1.20V voltage keep power draw low
- 2Rx8 rank on 260-pin SODIMM fits POSIFLEX EK-1532 kiosk
- Major OEM chips from Samsung, Micron or Hynix ensure stability
- Non-ECC unbuffered design simplifies drop-in installation
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Fragen zu diesem Artikel
How do I install this 260-pin SODIMM in the POSIFLEX EK-1532 and what step is often missed?
Power off the kiosk, open the memory compartment, align the notch on the 260-pin module with the slot key, press firmly until both side clips click, then verify 3200 speed in BIOS.
What maintenance or replacement will this DDR4 8GB module need over time?
No scheduled maintenance is required; the module has no heat spreader and runs at 1.20 V, so replacement is only needed if a fault appears or capacity must increase.
What limit appears first when this CL22 2Rx8 memory runs sustained workloads?
The CAS latency of 22 cycles at 3200 MT/s sets the response-time floor, so latency-sensitive tasks hit that timing ceiling before bandwidth saturates.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
