Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAQ memory upgrade

SKU CH-15CZ-CQA7W

8GB DDR5 5600MHz CL46 1Rx8 1.1V 288-pin UDIMM validated for Supermicro X13SAQ motherboards

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact 8 GB DDR5-5600 spec match for Supermicro X13SAQ
  • Major OEM Samsung, Micron, Hynix chips tested at rated speed and voltage
  • 1Rx8 Non-ECC unbuffered UDIMM fits board population rules
  • 1 V CL46 timing recognised by controller at full rated speed
  • 288-pin DDR5 UDIMM form factor installs directly in desktop slots

8GB DDR5-5600 UDIMM for Supermicro X13SAQ

This 8 GB DDR5-5600 module is built as an exact-match upgrade for the Supermicro X13SAQ motherboard. It uses a 288-pin unbuffered UDIMM form factor with CL46 latency and 1.10 V operation. Major OEM chips from Samsung, Micron or Hynix are tested at the rated speed, timing and voltage.

Suitable for single-slot upgrades on the X13SAQ

Builders who need more than 8 GB of capacity or who require ECC error correction should look at other modules. The stick is non-ECC and unbuffered, so it will not meet the needs of systems that demand registered memory or higher-density kits.

1Rx8 rank and 1.10 V define compatibility

The single-rank 1Rx8 organisation and 1.10 V voltage are the critical specifications that decide whether this module will be recognised at full capacity and run at its rated DDR5-5600 speed on the target board.

Puncte forte

  • Exact 8 GB DDR5-5600 spec match for Supermicro X13SAQ
  • Major OEM Samsung, Micron, Hynix chips tested at rated speed and voltage
  • 1Rx8 Non-ECC unbuffered UDIMM fits board population rules
  • 1 V CL46 timing recognised by controller at full rated speed
  • 288-pin DDR5 UDIMM form factor installs directly in desktop slots

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I confirm the module is running at 5600MHz CL46 after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s with timings of 46-46-46 and voltage at 1.10 V.

What is included in the package and do I need any extra parts?

The box contains a single 8 GB 288-pin DDR5 UDIMM; no heat spreader, cables or additional components are supplied or required.

Which version should I choose for a Supermicro X13SAQ motherboard?

Select the 8 GB DDR5 5600 PC5-44800 1Rx8 CL46 1.1 V UDIMM (part MD44800-818K1) — it matches the board’s exact rank, voltage and timing requirements.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.