Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAQ memory upgrade

SKU CH-15CZ-CQA7W

8GB DDR5 5600MHz CL46 1Rx8 1.1V 288-pin UDIMM validated for Supermicro X13SAQ motherboards

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact 8 GB DDR5-5600 spec match for Supermicro X13SAQ
  • Major OEM Samsung, Micron, Hynix chips tested at rated speed and voltage
  • 1Rx8 Non-ECC unbuffered UDIMM fits board population rules
  • 1 V CL46 timing recognised by controller at full rated speed
  • 288-pin DDR5 UDIMM form factor installs directly in desktop slots

8GB DDR5-5600 UDIMM for Supermicro X13SAQ

This 8 GB DDR5-5600 module is built as an exact-match upgrade for the Supermicro X13SAQ motherboard. It uses a 288-pin unbuffered UDIMM form factor with CL46 latency and 1.10 V operation. Major OEM chips from Samsung, Micron or Hynix are tested at the rated speed, timing and voltage.

Suitable for single-slot upgrades on the X13SAQ

Builders who need more than 8 GB of capacity or who require ECC error correction should look at other modules. The stick is non-ECC and unbuffered, so it will not meet the needs of systems that demand registered memory or higher-density kits.

1Rx8 rank and 1.10 V define compatibility

The single-rank 1Rx8 organisation and 1.10 V voltage are the critical specifications that decide whether this module will be recognised at full capacity and run at its rated DDR5-5600 speed on the target board.

Prednosti

  • Exact 8 GB DDR5-5600 spec match for Supermicro X13SAQ
  • Major OEM Samsung, Micron, Hynix chips tested at rated speed and voltage
  • 1Rx8 Non-ECC unbuffered UDIMM fits board population rules
  • 1 V CL46 timing recognised by controller at full rated speed
  • 288-pin DDR5 UDIMM form factor installs directly in desktop slots

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I confirm the module is running at 5600MHz CL46 after installation?

Enter the BIOS or use a tool such as CPU-Z and verify the memory frequency reads 5600 MT/s with timings of 46-46-46 and voltage at 1.10 V.

What is included in the package and do I need any extra parts?

The box contains a single 8 GB 288-pin DDR5 UDIMM; no heat spreader, cables or additional components are supplied or required.

Which version should I choose for a Supermicro X13SAQ motherboard?

Select the 8 GB DDR5 5600 PC5-44800 1Rx8 CL46 1.1 V UDIMM (part MD44800-818K1) — it matches the board’s exact rank, voltage and timing requirements.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.