NEMIX RAM
NEMIX RAM 96GB 1Rx4 DDR5 4800 CL40 ECC RDIMM SuperMicro memory upgrade
A 96GB DDR5 registered ECC module running at 4800 MT/s with CL40 latency and 1.1V operation for Supermicro servers
- Capacity96GB
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB capacity supports large datasets and virtualization workloads
- DDR5 4800 speed delivers high bandwidth for server applications
- ECC registered design detects and corrects memory errors automatically
- 1 V operation reduces power draw in dense configurations
- 288-pin RDIMM form factor fits SuperMicro server motherboards
96GB DDR5 4800 ECC RDIMM
This is a single 96GB DDR5 4800 registered DIMM with ECC and a CL40 latency. It operates at 1.1V using a 2Rx4 organisation on a 288-pin form factor. The module is built for SuperMicro server and workstation platforms that require registered memory.
Suited for SuperMicro memory upgrades
Administrators expanding SuperMicro systems that support DDR5 4800 registered ECC modules will find this kit compatible. Builders needing unbuffered UDIMMs, non-ECC memory, lower capacities or different speeds should look elsewhere because this part is a registered server DIMM only.
96GB single-module capacity
One module delivers 96GB of registered ECC memory, providing substantial headroom for virtualisation, database or AI workloads on supported SuperMicro boards. The 2Rx4 density and CL40 timing set the performance envelope; systems requiring higher frequencies, lower latencies or unregistered memory will not be served by this module.
Puncte forte
- 96 GB capacity supports large datasets and virtualization workloads
- DDR5 4800 speed delivers high bandwidth for server applications
- ECC registered design detects and corrects memory errors automatically
- 1 V operation reduces power draw in dense configurations
- 288-pin RDIMM form factor fits SuperMicro server motherboards
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-9624K1 |
| Capacity | 96GB |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 96GB (1X96GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Întrebări despre acest articol
What type of motherboard slots are needed for this 288-PIN DDR5 RDIMM?
This module requires a 288-PIN DDR5 RDIMM slot on a Supermicro server or workstation motherboard that supports registered ECC memory at 1.1V.
Can I install this 2Rx4 registered ECC module alongside existing 1Rx4 registered ECC modules in the same server?
Mixing 2Rx4 and 1Rx4 registered ECC modules is often possible if the motherboard and BIOS support mixed-rank configurations, but you must verify the specific Supermicro system manual for approved population rules.
How can I confirm the module is running at the correct 4800 MT/s speed and CL40 latency after installation?
Enter the system BIOS or use a hardware information tool in the OS to verify the memory is detected at 4800 MT/s (PC5-38400) with CAS latency 40 and ECC active.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



