We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 96GB 1Rx4 DDR5 4800 CL40 ECC RDIMM SuperMicro memory upgrade

SKU CH-0VZS-7EKD3

A 96GB DDR5 registered ECC module running at 4800 MT/s with CL40 latency and 1.1V operation for Supermicro servers

  • Capacity96GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB capacity supports large datasets and virtualization workloads
  • DDR5 4800 speed delivers high bandwidth for server applications
  • ECC registered design detects and corrects memory errors automatically
  • 1 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits SuperMicro server motherboards

96GB DDR5 4800 ECC RDIMM

This is a single 96GB DDR5 4800 registered DIMM with ECC and a CL40 latency. It operates at 1.1V using a 2Rx4 organisation on a 288-pin form factor. The module is built for SuperMicro server and workstation platforms that require registered memory.

Suited for SuperMicro memory upgrades

Administrators expanding SuperMicro systems that support DDR5 4800 registered ECC modules will find this kit compatible. Builders needing unbuffered UDIMMs, non-ECC memory, lower capacities or different speeds should look elsewhere because this part is a registered server DIMM only.

96GB single-module capacity

One module delivers 96GB of registered ECC memory, providing substantial headroom for virtualisation, database or AI workloads on supported SuperMicro boards. The 2Rx4 density and CL40 timing set the performance envelope; systems requiring higher frequencies, lower latencies or unregistered memory will not be served by this module.

Highlights

  • 96 GB capacity supports large datasets and virtualization workloads
  • DDR5 4800 speed delivers high bandwidth for server applications
  • ECC registered design detects and corrects memory errors automatically
  • 1 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits SuperMicro server motherboards

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content96GB (1X96GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

What type of motherboard slots are needed for this 288-PIN DDR5 RDIMM?

This module requires a 288-PIN DDR5 RDIMM slot on a Supermicro server or workstation motherboard that supports registered ECC memory at 1.1V.

Can I install this 2Rx4 registered ECC module alongside existing 1Rx4 registered ECC modules in the same server?

Mixing 2Rx4 and 1Rx4 registered ECC modules is often possible if the motherboard and BIOS support mixed-rank configurations, but you must verify the specific Supermicro system manual for approved population rules.

How can I confirm the module is running at the correct 4800 MT/s speed and CL40 latency after installation?

Enter the system BIOS or use a hardware information tool in the OS to verify the memory is detected at 4800 MT/s (PC5-38400) with CAS latency 40 and ECC active.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.