Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR5 RDIMM modules, 288-pin, no heat spreader

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 288-pin Supermicro H13SSF memory upgrade

SKU CH-KNTY-9P3ZY

96 GB DDR5-5600 ECC registered RDIMM kit validated for Supermicro H13SSF servers

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required DIMM slots without adapters

Exact-fit DDR5-5600 registered kit

This NEMIX RAM kit provides 96 GB of DDR5-5600 (PC5-44800) memory in two 48 GB 288-pin RDIMMs. Each module is registered, ECC-enabled and timed at CL46 with a 1.10 V operating voltage. The 2Rx8 organisation matches the density and rank layout the Supermicro H13SSF memory controller expects for full-speed operation.

For servers that require registered ECC RDIMMs

The kit suits administrators upgrading a Supermicro H13SSF platform that demands registered DDR5 with on-die ECC. It will not work in systems that accept only unbuffered UDIMMs, SODIMM form factors or earlier DDR generations. Buyers who need a different capacity, speed grade or voltage should verify their motherboard's qualified-vendor list before purchasing.

2Rx8 registered DDR5 at 1.10 V

The registered architecture buffers address and command signals so the memory controller can drive a fully populated configuration without signal degradation, while ECC corrects single-bit errors in flight. This combination of rank structure, voltage and form factor is the single specification that determines whether the modules will be recognised and run at their rated 5600 MT/s on the target board.

Puncte forte

  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required DIMM slots without adapters

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Întrebări despre acest articol

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13SSF memory slots?

Yes, the kit uses the 288-pin RDIMM form factor required by the H13SSF; it is not a UDIMM or SODIMM, so it seats directly in the server's DDR5 slots.

What is the correct population order when installing both 48 GB modules on the H13SSF?

Follow the motherboard manual's approved DIMM population sequence; the kit is spec-matched to those rules, but the exact slot order must come from the system documentation.

Do these registered ECC modules require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself; ECC error correction runs automatically, and the modules have no heat spreaders or moving parts that require servicing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.