我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules, 288-pin, no heat spreader

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 288-pin Supermicro H13SSF memory upgrade

SKU CH-KNTY-9P3ZY

96 GB DDR5-5600 ECC registered RDIMM kit validated for Supermicro H13SSF servers

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required DIMM slots without adapters

Exact-fit DDR5-5600 registered kit

This NEMIX RAM kit provides 96 GB of DDR5-5600 (PC5-44800) memory in two 48 GB 288-pin RDIMMs. Each module is registered, ECC-enabled and timed at CL46 with a 1.10 V operating voltage. The 2Rx8 organisation matches the density and rank layout the Supermicro H13SSF memory controller expects for full-speed operation.

For servers that require registered ECC RDIMMs

The kit suits administrators upgrading a Supermicro H13SSF platform that demands registered DDR5 with on-die ECC. It will not work in systems that accept only unbuffered UDIMMs, SODIMM form factors or earlier DDR generations. Buyers who need a different capacity, speed grade or voltage should verify their motherboard's qualified-vendor list before purchasing.

2Rx8 registered DDR5 at 1.10 V

The registered architecture buffers address and command signals so the memory controller can drive a fully populated configuration without signal degradation, while ECC corrects single-bit errors in flight. This combination of rank structure, voltage and form factor is the single specification that determines whether the modules will be recognised and run at their rated 5600 MT/s on the target board.

商品特色

  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for Supermicro H13SSF
  • Registered ECC architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required DIMM slots without adapters

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

商品問答

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H13SSF memory slots?

Yes, the kit uses the 288-pin RDIMM form factor required by the H13SSF; it is not a UDIMM or SODIMM, so it seats directly in the server's DDR5 slots.

What is the correct population order when installing both 48 GB modules on the H13SSF?

Follow the motherboard manual's approved DIMM population sequence; the kit is spec-matched to those rules, but the exact slot order must come from the system documentation.

Do these registered ECC modules require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself; ECC error correction runs automatically, and the modules have no heat spreaders or moving parts that require servicing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。