Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 192GB 4x48GB ECC RDIMM memory upgrade for Supermicro H13SSW

SKU CH-7VAG-KG6Q2

192GB DDR5-4800 registered ECC RDIMM kit (4 × 48GB, CL40, 1.10V, 2Rx8) validated for Supermicro H13SSW motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Vedeți celelalte 24 configurații
  • 192 GB capacity in a matched 4 × 48 GB kit for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput on the Supermicro H13SSW
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 2Rx8 rank matches the motherboard's memory-controller expectations exactly
  • Lifetime replacement warranty with free US-based technical support included

Exact DDR5-4800 ECC RDIMM kit for Supermicro H13SSW

This 192GB kit contains four 48GB registered DIMMs built to the precise DDR5-4800 CL40 1.1V 2Rx8 specification the Supermicro H13SSW memory controller expects. The modules are 288-pin RDIMMs with ECC and registered buffering so the server recognises the full capacity at rated speed. It is not for systems that require UDIMM or SODIMM form factors.

DDR5-4800 registered ECC limits

The DDR5-4800 (PC5-38400) standard tops out at 4800 MT/s with CL40 timing at 1.1V on this kit. Registered buffering lets every slot run fully populated without overloading the memory controller, while ECC corrects single-bit errors on the fly. Modules without registered buffering or ECC will not meet the board's stability requirements.

Verify H13SSW population rules before ordering

Server memory support varies by model, so consult the Supermicro H13SSW manual for approved capacities, DIMM population order, and installation steps. The board requires 288-pin RDIMMs; UDIMM or SODIMM modules will not fit. Confirm the slot sequence for a four-module kit to ensure the full 192GB is recognised.

Puncte forte

  • 192 GB capacity in a matched 4 × 48 GB kit for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput on the Supermicro H13SSW
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 2Rx8 rank matches the motherboard's memory-controller expectations exactly
  • Lifetime replacement warranty with free US-based technical support included

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Should I choose this 192GB kit or a smaller capacity for my Supermicro H13SSW?

This kit provides 192GB across four 48GB modules, filling all four DIMM slots on the H13SSW. If your workload needs maximum capacity and the board supports 48GB per slot, this is the correct population.

What does the DDR5 4800 rating mean once installed in the H13SSW?

The modules run at 4800 MT/s with CL40 latency at 1.1V, delivering PC5-38400 bandwidth. The registered design lets the memory controller drive all four slots at this rated speed without down-clocking.

How does the 288-pin RDIMM interface limit or enable performance on this board?

The 288-pin Registered DIMM form factor is required by the H13SSW. Registered buffering offloads the memory controller, allowing full 192GB capacity at DDR5 4800 across all four slots while ECC corrects single-bit errors.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.