Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 192GB 4x48GB ECC RDIMM memory upgrade for Supermicro H13SSW

SKU CH-7VAG-KG6Q2

192GB DDR5-4800 registered ECC RDIMM kit (4 × 48GB, CL40, 1.10V, 2Rx8) validated for Supermicro H13SSW motherboards

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Zobrazit dalších 24 konfigurací
  • 192 GB capacity in a matched 4 × 48 GB kit for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput on the Supermicro H13SSW
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 2Rx8 rank matches the motherboard's memory-controller expectations exactly
  • Lifetime replacement warranty with free US-based technical support included

Exact DDR5-4800 ECC RDIMM kit for Supermicro H13SSW

This 192GB kit contains four 48GB registered DIMMs built to the precise DDR5-4800 CL40 1.1V 2Rx8 specification the Supermicro H13SSW memory controller expects. The modules are 288-pin RDIMMs with ECC and registered buffering so the server recognises the full capacity at rated speed. It is not for systems that require UDIMM or SODIMM form factors.

DDR5-4800 registered ECC limits

The DDR5-4800 (PC5-38400) standard tops out at 4800 MT/s with CL40 timing at 1.1V on this kit. Registered buffering lets every slot run fully populated without overloading the memory controller, while ECC corrects single-bit errors on the fly. Modules without registered buffering or ECC will not meet the board's stability requirements.

Verify H13SSW population rules before ordering

Server memory support varies by model, so consult the Supermicro H13SSW manual for approved capacities, DIMM population order, and installation steps. The board requires 288-pin RDIMMs; UDIMM or SODIMM modules will not fit. Confirm the slot sequence for a four-module kit to ensure the full 192GB is recognised.

Přednosti

  • 192 GB capacity in a matched 4 × 48 GB kit for maximum server density
  • DDR5-4800 speed with CL40 latency delivers rated throughput on the Supermicro H13SSW
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at 2Rx8 rank matches the motherboard's memory-controller expectations exactly
  • Lifetime replacement warranty with free US-based technical support included

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I choose this 192GB kit or a smaller capacity for my Supermicro H13SSW?

This kit provides 192GB across four 48GB modules, filling all four DIMM slots on the H13SSW. If your workload needs maximum capacity and the board supports 48GB per slot, this is the correct population.

What does the DDR5 4800 rating mean once installed in the H13SSW?

The modules run at 4800 MT/s with CL40 latency at 1.1V, delivering PC5-38400 bandwidth. The registered design lets the memory controller drive all four slots at this rated speed without down-clocking.

How does the 288-pin RDIMM interface limit or enable performance on this board?

The 288-pin Registered DIMM form factor is required by the H13SSW. Registered buffering offloads the memory controller, allowing full 192GB capacity at DDR5 4800 across all four slots while ECC corrects single-bit errors.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.