Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM DDR5 5600 288GB (6x48GB) ECC RDIMM CL46 1.1V MZ73-LM2 memory upgrade

SKU CH-KAA7-YH0N3

A 288 GB (6 × 48 GB) DDR5-5600 ECC registered RDIMM kit at CL46 and 1.1 V, validated for the GIGABYTE MZ73-LM2 motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Vedeți celelalte 24 configurații
  • 288 GB total capacity for memory-intensive workloads from six 48 GB modules
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth for server throughput
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V CL46 timing matches the motherboard's exact voltage and latency requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 memory slots precisely

Exact-match server upgrade

This 288GB kit contains six 48GB DDR5 RDIMM modules built for the GIGABYTE MZ73-LM2 motherboard. Each module runs at 5600MHz with a CL46 latency and operates at 1.1V. The registered ECC design matches the board’s memory-controller requirements so the full capacity is recognised at rated speed.

Registered ECC architecture

Registered buffering reduces electrical load on the memory controller, allowing all six slots to be populated without signal degradation. ECC corrects single-bit errors in real time, protecting data integrity in production workloads. The 288-pin RDIMM form factor is mandatory for this platform; UDIMM or SODIMM modules will not fit.

Sustained-load stability

Continuous operation at full population keeps every channel active at 5600MHz without down-clocking. The 1.1V nominal voltage and major-OEM DRAM chips maintain consistent timing under extended compute tasks. Buyers who need a different capacity, a non-ECC layout, or consumer UDIMM form factor cannot use this kit.

Puncte forte

  • 288 GB total capacity for memory-intensive workloads from six 48 GB modules
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth for server throughput
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V CL46 timing matches the motherboard's exact voltage and latency requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 memory slots precisely

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What is the CAS latency of the DDR5 5600 RDIMMs in this kit?

The modules run at CL46, which is the timing the GIGABYTE MZ73-LM2 memory controller expects for full-speed operation.

Do the 48 GB RDIMMs have a heat spreader for all-day server loads?

No, these modules ship without a heat spreader; they rely on the chassis airflow the MZ73-LM2 platform is designed to provide.

Must the GIGABYTE MZ73-LM2 motherboard support registered ECC DDR5 RDIMMs for this kit to work?

Yes, the board must accept 288-pin registered ECC DDR5 RDIMMs; the kit is spec-matched to that exact requirement.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.