Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Six green DDR5 RDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM DDR5 5600 288GB (6x48GB) ECC RDIMM CL46 1.1V MZ73-LM2 memory upgrade

SKU CH-KAA7-YH0N3

A 288 GB (6 × 48 GB) DDR5-5600 ECC registered RDIMM kit at CL46 and 1.1 V, validated for the GIGABYTE MZ73-LM2 motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Ver as outras 24 configurações
  • 288 GB total capacity for memory-intensive workloads from six 48 GB modules
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth for server throughput
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V CL46 timing matches the motherboard's exact voltage and latency requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 memory slots precisely

Exact-match server upgrade

This 288GB kit contains six 48GB DDR5 RDIMM modules built for the GIGABYTE MZ73-LM2 motherboard. Each module runs at 5600MHz with a CL46 latency and operates at 1.1V. The registered ECC design matches the board’s memory-controller requirements so the full capacity is recognised at rated speed.

Registered ECC architecture

Registered buffering reduces electrical load on the memory controller, allowing all six slots to be populated without signal degradation. ECC corrects single-bit errors in real time, protecting data integrity in production workloads. The 288-pin RDIMM form factor is mandatory for this platform; UDIMM or SODIMM modules will not fit.

Sustained-load stability

Continuous operation at full population keeps every channel active at 5600MHz without down-clocking. The 1.1V nominal voltage and major-OEM DRAM chips maintain consistent timing under extended compute tasks. Buyers who need a different capacity, a non-ECC layout, or consumer UDIMM form factor cannot use this kit.

Pontos fortes

  • 288 GB total capacity for memory-intensive workloads from six 48 GB modules
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth for server throughput
  • Registered ECC design corrects single-bit errors and buffers signals for stable fully-populated operation
  • 1 V CL46 timing matches the motherboard's exact voltage and latency requirements
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM2 memory slots precisely

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What is the CAS latency of the DDR5 5600 RDIMMs in this kit?

The modules run at CL46, which is the timing the GIGABYTE MZ73-LM2 memory controller expects for full-speed operation.

Do the 48 GB RDIMMs have a heat spreader for all-day server loads?

No, these modules ship without a heat spreader; they rely on the chassis airflow the MZ73-LM2 platform is designed to provide.

Must the GIGABYTE MZ73-LM2 motherboard support registered ECC DDR5 RDIMMs for this kit to work?

Yes, the board must accept 288-pin registered ECC DDR5 RDIMMs; the kit is spec-matched to that exact requirement.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.