Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM DDR5-5600 2TB (16x128GB) ECC Registered RDIMM CL46 1.1V 2Rx4 Supermicro H14DST-FL memory upgrade

SKU CH-WMRF-FMRMG

A 2 TB registered ECC DDR5 kit of sixteen 128 GB modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H14DST-FL motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 2 TB capacity from sixteen 128 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US technical support

Server memory kit for Supermicro H14DST-FL

This 2 TB kit contains sixteen 128 GB DDR5 RDIMMs built for the Supermicro H14DST-FL motherboard. Each module is a registered ECC DIMM that the board recognises at full capacity and rated speed. It targets administrators who need maximum memory density in a single qualified package.

DDR5 RDIMM interface constraints

The 288-pin registered form factor is mandatory for this motherboard; unbuffered UDIMMs or SODIMMs will not function. Registered architecture buffers the address and command bus so all sixteen slots can be populated without signal degradation. ECC operation corrects single-bit errors on the fly to prevent silent data corruption.

Capacity and headroom

Sixteen dual-rank 128 GB modules deliver 2 TB total, running at 5600 MT/s with CL46 latency at 1.1 V. This configuration saturates the board’s supported DIMM population and memory-controller limits. Workloads requiring more than 2 TB or higher frequencies cannot be accommodated by this kit.

Puncte forte

  • 2 TB capacity from sixteen 128 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US technical support

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Should I choose the 16 x 128GB kit or a smaller capacity for my Supermicro H14DST-FL?

The 16 x 128GB kit provides the full 2TB capacity this motherboard supports when all 16 slots are populated with Registered ECC RDIMMs.

What does DDR5-5600 CL46 mean for real-world server throughput?

The modules run at 5600 MT/s with CAS latency 46, delivering the rated bandwidth of PC5-44800 when the memory controller is fully populated with 2Rx4 Registered DIMMs.

Does the 288-pin RDIMM interface limit speed or capacity on this board?

The 288-pin Registered DDR5 form factor is exactly what the H14DST-FL requires; it enables full 2TB capacity at 5600 MT/s without downclocking.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.