Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión

NEMIX RAM

NEMIX RAM DDR5-5600 2TB (16x128GB) ECC Registered RDIMM CL46 1.1V 2Rx4 Supermicro H14DST-FL memory upgrade

SKU CH-WMRF-FMRMG

A 2 TB registered ECC DDR5 kit of sixteen 128 GB modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H14DST-FL motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 2 TB capacity from sixteen 128 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US technical support

Server memory kit for Supermicro H14DST-FL

This 2 TB kit contains sixteen 128 GB DDR5 RDIMMs built for the Supermicro H14DST-FL motherboard. Each module is a registered ECC DIMM that the board recognises at full capacity and rated speed. It targets administrators who need maximum memory density in a single qualified package.

DDR5 RDIMM interface constraints

The 288-pin registered form factor is mandatory for this motherboard; unbuffered UDIMMs or SODIMMs will not function. Registered architecture buffers the address and command bus so all sixteen slots can be populated without signal degradation. ECC operation corrects single-bit errors on the fly to prevent silent data corruption.

Capacity and headroom

Sixteen dual-rank 128 GB modules deliver 2 TB total, running at 5600 MT/s with CL46 latency at 1.1 V. This configuration saturates the board’s supported DIMM population and memory-controller limits. Workloads requiring more than 2 TB or higher frequencies cannot be accommodated by this kit.

Puntos fuertes

  • 2 TB capacity from sixteen 128 GB modules
  • DDR5-5600 speed with CL46 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US technical support

Especificaciones

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otras versiones de este modelo

5 más en esta gama

Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.

Preguntas sobre este artículo

Should I choose the 16 x 128GB kit or a smaller capacity for my Supermicro H14DST-FL?

The 16 x 128GB kit provides the full 2TB capacity this motherboard supports when all 16 slots are populated with Registered ECC RDIMMs.

What does DDR5-5600 CL46 mean for real-world server throughput?

The modules run at 5600 MT/s with CAS latency 46, delivering the rated bandwidth of PC5-44800 when the memory controller is fully populated with 2Rx4 Registered DIMMs.

Does the 288-pin RDIMM interface limit speed or capacity on this board?

The 288-pin Registered DDR5 form factor is exactly what the H14DST-FL requires; it enables full 2TB capacity at 5600 MT/s without downclocking.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.