Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green circuit boards with gold contacts and black chips in a clear plastic tray

NEMIX RAM

NEMIX RAM DDR5 6400 384GB 4x96GB CL52 1.1V ECC RDIMM memory upgrade

SKU CH-CJMQ-7SH60

A 384 GB DDR5 server memory kit with four 96 GB registered ECC RDIMMs running at 6400 MT/s, CL52, 1.1 V, verified for the GIGABYTE MS04-CE0 motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Vedeți celelalte 18 configurații
  • 384 GB capacity from four 96 GB modules enables dense server memory configurations
  • DDR5 6400 speed with CL52 latency delivers rated throughput for compatible platforms
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 10 V operation at 2Rx4 rank matches controller expectations for reliable recognition
  • 288-pin RDIMM form factor fits GIGABYTE MS04-CE0 motherboard memory slots

Targeted Server Upgrade

This NEMIX RAM kit delivers 384GB of DDR5 memory across four 96GB modules. It is built for the GIGABYTE MS04-CE0 motherboard where registered ECC RDIMMs are required. The 2Rx4 organisation and 1.1V operation match the platform's native memory controller specification. System administrators can populate all slots at the rated speed with confidence.

Fitment Guidance

This kit suits operators who need the exact registered ECC configuration validated for the named GIGABYTE server board. Builders using consumer UDIMMs, unbuffered modules, or SODIMM form factors cannot use this product. Workstations that lack RDIMM support or ECC capability should look at a different memory type.

Decisive Specification

The registered ECC RDIMM architecture with 2Rx4 ranking is the single attribute that determines compatibility. Only motherboards wired for registered DDR5 at 1.1V will initialise this kit at 6400 MT/s. Verify the platform documentation for RDIMM support before ordering.

Puncte forte

  • 384 GB capacity from four 96 GB modules enables dense server memory configurations
  • DDR5 6400 speed with CL52 latency delivers rated throughput for compatible platforms
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 10 V operation at 2Rx4 rank matches controller expectations for reliable recognition
  • 288-pin RDIMM form factor fits GIGABYTE MS04-CE0 motherboard memory slots

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the GIGABYTE MS04-CE0 motherboard need to support 288-pin DDR5 RDIMM slots to install this kit?

Yes, the kit uses 288-pin DDR5 RDIMM modules, so the motherboard must provide registered DIMM slots for DDR5 memory.

Can I mix these 96GB 2Rx4 registered ECC modules with older unbuffered UDIMMs in the same server?

No, registered RDIMMs and unbuffered UDIMMs use different signalling and cannot be mixed on the same memory controller.

How do I confirm the kit is running at DDR5 6400 with CL52 after installation?

Check the BIOS memory information or a tool like dmidecode to verify speed shows 6400 MT/s and CAS latency reads 52.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.