Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM MD23400-818K2 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-DEK4-B65E1

A 16 GB DDR4 2933 kit of two 8 GB UDIMMs with CL21 latency and 1.2 V operation for compatible Supermicro systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR4 2933 MT/s speed feeds data faster to the CPU
  • CL21 latency keeps response tight under load
  • 20 V operation reduces power draw and heat
  • Validated for Supermicro 5039AD-I C9X299-PGF CSE-GS5A-754K workstations

System-Specific DDR4 Kit

This 16 GB NEMIX RAM kit contains two 8 GB unbuffered UDIMM modules rated for DDR4 2933 at CL21 1.20 V. It is built for Supermicro desktop and workstation platforms such as the 5039AD-I and C9X299-PGF where ECC is not required.

Platform Compatibility Check

Verify that your motherboard accepts non-ECC unbuffered DDR4 UDIMMs and supports the PC4-23400 data rate before ordering. The kit targets the listed Supermicro models; other boards may need different ranks, voltages or timings to post reliably.

Sustained Load Behaviour

Modules use major OEM Samsung, Micron or Hynix chips stress-tested under load to maintain stability during extended workloads. Without heat spreaders, adequate chassis airflow is necessary to keep temperatures in check during prolonged operation.

Puncte forte

  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR4 2933 MT/s speed feeds data faster to the CPU
  • CL21 latency keeps response tight under load
  • 20 V operation reduces power draw and heat
  • Validated for Supermicro 5039AD-I C9X299-PGF CSE-GS5A-754K workstations

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Întrebări despre acest articol

Does the 16GB kit include both 8GB modules or do I need to buy a second stick?

The package content lists 16GB (2x8GB) as a matched kit, so both modules are included.

Should I choose this DDR4 2933 CL21 kit or a different speed for my Supermicro workstation?

This kit is validated for the Supermicro systems listed, so selecting the exact 2933 MT/s CL21 specification avoids mismatched timing issues.

What does the 2933 MT/s rating deliver once the modules are installed in a Supermicro board?

The modules run at 2933 MT/s with CL21 latency at 1.20V, providing the rated DDR4 bandwidth for the qualified Supermicro platforms.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.