نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM MD23400-818K2 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-DEK4-B65E1

A 16 GB DDR4 2933 kit of two 8 GB UDIMMs with CL21 latency and 1.2 V operation for compatible Supermicro systems

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR4 2933 MT/s speed feeds data faster to the CPU
  • CL21 latency keeps response tight under load
  • 20 V operation reduces power draw and heat
  • Validated for Supermicro 5039AD-I C9X299-PGF CSE-GS5A-754K workstations

System-Specific DDR4 Kit

This 16 GB NEMIX RAM kit contains two 8 GB unbuffered UDIMM modules rated for DDR4 2933 at CL21 1.20 V. It is built for Supermicro desktop and workstation platforms such as the 5039AD-I and C9X299-PGF where ECC is not required.

Platform Compatibility Check

Verify that your motherboard accepts non-ECC unbuffered DDR4 UDIMMs and supports the PC4-23400 data rate before ordering. The kit targets the listed Supermicro models; other boards may need different ranks, voltages or timings to post reliably.

Sustained Load Behaviour

Modules use major OEM Samsung, Micron or Hynix chips stress-tested under load to maintain stability during extended workloads. Without heat spreaders, adequate chassis airflow is necessary to keep temperatures in check during prolonged operation.

أبرز المميزات

  • 16 GB kit boosts multitasking headroom with two 8 GB modules
  • DDR4 2933 MT/s speed feeds data faster to the CPU
  • CL21 latency keeps response tight under load
  • 20 V operation reduces power draw and heat
  • Validated for Supermicro 5039AD-I C9X299-PGF CSE-GS5A-754K workstations

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

أسئلة حول هذا المنتج

Does the 16GB kit include both 8GB modules or do I need to buy a second stick?

The package content lists 16GB (2x8GB) as a matched kit, so both modules are included.

Should I choose this DDR4 2933 CL21 kit or a different speed for my Supermicro workstation?

This kit is validated for the Supermicro systems listed, so selecting the exact 2933 MT/s CL21 specification avoids mismatched timing issues.

What does the 2933 MT/s rating deliver once the modules are installed in a Supermicro board?

The modules run at 2933 MT/s with CL21 latency at 1.20V, providing the rated DDR4 bandwidth for the qualified Supermicro platforms.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.