Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM MR51200-744K4 512GB (4x128GB) DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM memory upgrade

SKU CH-ZEGY-JE83V

512GB DDR5-6400 ECC registered RDIMM kit (4×128GB) verified for Supermicro X14SDV-36CE-SP3F at CL52 1.1V

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from four 128 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency and 1.1 V operation for efficient data throughput
  • Registered ECC design with 4Rx4 organisation to correct single-bit errors and support full-slot populations
  • 288-pin RDIMM form factor validated for the Supermicro X14SDV-36CE-SP3F motherboard
  • Built with major OEM Samsung Micron Hynix DRAM chips for enterprise-grade reliability

Server-grade capacity upgrade

This 512GB kit delivers four 128GB DDR5 RDIMM modules rated at 6400MT/s with CL52 latency and 1.1V operation. It targets administrators scaling memory on Supermicro X14SDV-36CE-SP3F platforms that require registered ECC memory.

Replaces partial or slower populations

The kit fills all four channels with matched 4Rx4 modules so the memory controller sees a single validated configuration. The jump is worth it when workloads exceed current capacity or when mixed-rank populations force the board to downclock.

Fits registered DIMM slots on qualified boards

Each 288-pin module uses the registered architecture the X14SDV-36CE-SP3F expects, freeing the on-die controller from electrical load. ECC corrects single-bit errors in flight while the 1.1V baseline keeps power draw predictable. Verify the motherboard manual for approved population order before installation.

Puncte forte

  • 512 GB total capacity from four 128 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency and 1.1 V operation for efficient data throughput
  • Registered ECC design with 4Rx4 organisation to correct single-bit errors and support full-slot populations
  • 288-pin RDIMM form factor validated for the Supermicro X14SDV-36CE-SP3F motherboard
  • Built with major OEM Samsung Micron Hynix DRAM chips for enterprise-grade reliability

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 288-pin RDIMM modules fit the Supermicro X14SDV-36CE-SP3F motherboard slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the X14SDV-36CE-SP3F, so each 128 GB module seats directly in the board's DDR5 DIMM slots.

What is the correct installation order for the four 128 GB sticks on this board?

The Supermicro X14SDV-36CE-SP3F manual defines a specific DIMM population sequence; you must follow that order so all 512 GB are recognised at DDR5-6400 with CL52 timings.

Do these registered ECC modules need any firmware updates or battery replacements over time?

No, the RDIMMs are passive hardware with no firmware or onboard battery; they run at 1.1 V and rely on the motherboard's memory controller for ECC and registered buffering.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.