저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM MR51200-744K4 512GB (4x128GB) DDR5 6400 CL52 1.1V 4Rx4 ECC RDIMM memory upgrade

SKU CH-ZEGY-JE83V

512GB DDR5-6400 ECC registered RDIMM kit (4×128GB) verified for Supermicro X14SDV-36CE-SP3F at CL52 1.1V

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

  • 512 GB total capacity from four 128 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency and 1.1 V operation for efficient data throughput
  • Registered ECC design with 4Rx4 organisation to correct single-bit errors and support full-slot populations
  • 288-pin RDIMM form factor validated for the Supermicro X14SDV-36CE-SP3F motherboard
  • Built with major OEM Samsung Micron Hynix DRAM chips for enterprise-grade reliability

Server-grade capacity upgrade

This 512GB kit delivers four 128GB DDR5 RDIMM modules rated at 6400MT/s with CL52 latency and 1.1V operation. It targets administrators scaling memory on Supermicro X14SDV-36CE-SP3F platforms that require registered ECC memory.

Replaces partial or slower populations

The kit fills all four channels with matched 4Rx4 modules so the memory controller sees a single validated configuration. The jump is worth it when workloads exceed current capacity or when mixed-rank populations force the board to downclock.

Fits registered DIMM slots on qualified boards

Each 288-pin module uses the registered architecture the X14SDV-36CE-SP3F expects, freeing the on-die controller from electrical load. ECC corrects single-bit errors in flight while the 1.1V baseline keeps power draw predictable. Verify the motherboard manual for approved population order before installation.

주요 특징

  • 512 GB total capacity from four 128 GB modules for high-density server workloads
  • DDR5-6400 speed with CL52 latency and 1.1 V operation for efficient data throughput
  • Registered ECC design with 4Rx4 organisation to correct single-bit errors and support full-slot populations
  • 288-pin RDIMM form factor validated for the Supermicro X14SDV-36CE-SP3F motherboard
  • Built with major OEM Samsung Micron Hynix DRAM chips for enterprise-grade reliability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 288-pin RDIMM modules fit the Supermicro X14SDV-36CE-SP3F motherboard slots?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor required by the X14SDV-36CE-SP3F, so each 128 GB module seats directly in the board's DDR5 DIMM slots.

What is the correct installation order for the four 128 GB sticks on this board?

The Supermicro X14SDV-36CE-SP3F manual defines a specific DIMM population sequence; you must follow that order so all 512 GB are recognised at DDR5-6400 with CL52 timings.

Do these registered ECC modules need any firmware updates or battery replacements over time?

No, the RDIMMs are passive hardware with no firmware or onboard battery; they run at 1.1 V and rely on the motherboard's memory controller for ECC and registered buffering.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.