저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM DDR5 4800 384GB 4x96GB ECC RDIMM CL40 1.1V 2Rx4 memory upgrade

SKU CH-Z4AY-ETS2K

A 384 GB DDR5-4800 ECC registered server kit in four 96 GB modules at CL40 and 1.1 V for the Supermicro X14SDV-20C-SP3F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity lets you run large databases and virtualization workloads without swapping
  • Four 96 GB modules fill every slot at the rated 4800 MT/s speed for maximum throughput
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation reduces power draw and heat in dense server configurations
  • Verified fit for the Supermicro X14SDV-20C-SP3F motherboard ensures the memory controller recognises the full kit at rated timings

Exact-fit DDR5 server kit

This 384 GB kit consists of four 96 GB DDR5 4800 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDV-20C-SP3F motherboard expects. It targets administrators who need maximum capacity in every slot without down-clocking or population errors.

Verify board population rules

Before ordering, consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps. The modules are 288-pin registered RDIMMs that operate at 1.1 V with CL40 latency, and the board must accept 2Rx4 organisation at full speed.

Registered ECC stability

Registered buffering offloads the memory controller so all four slots run fully populated at rated speed, while on-die ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The kit includes only the four RDIMMs; no heat spreaders or additional software are supplied.

주요 특징

  • 384 GB total capacity lets you run large databases and virtualization workloads without swapping
  • Four 96 GB modules fill every slot at the rated 4800 MT/s speed for maximum throughput
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation reduces power draw and heat in dense server configurations
  • Verified fit for the Supermicro X14SDV-20C-SP3F motherboard ensures the memory controller recognises the full kit at rated timings

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Does the kit include all four 96 GB modules or must they be purchased separately?

The kit ships as a matched set of four 96 GB DDR5 4800 RDIMMs, giving the full 384 GB capacity in one package.

Should I choose a different speed or latency if my Supermicro X14SDV-20C-SP3F board supports higher DDR5 rates?

This kit is an exact-match upgrade validated for DDR5 4800 CL40 at 1.1 V; using a different speed or timing may prevent the board from recognising the full 384 GB at rated performance.

What does the DDR5 4800 PC5-38400 rating mean when the modules are installed in the Supermicro X14SDV-20C-SP3F?

The modules will run at 4800 MT/s with CL40 latency and 1.1 V, delivering the registered ECC bandwidth and error correction the board's memory controller expects for full-capacity operation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.