저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 512GB kit

NEMIX RAM

NEMIX RAM DDR5 6400 512GB 4x128GB CL52 1.1V 4Rx4 ECC RDIMM Supermicro X14SDV-42C-SP3F

SKU CH-BHM9-XJ7FF

A 512 GB DDR5-6400 registered ECC kit of four 128 GB modules at 1.1 V CL52, validated for the Supermicro X14SDV-42C-SP3F motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 4X128GB

  • Massive 512 GB capacity from four 128 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation matches the board's memory-controller requirements exactly
  • Validated for Supermicro X14SDV-42C-SP3F with 288-pin RDIMM form factor

Exact-Match Server Upgrade

This 512GB kit contains four 128GB DDR5 RDIMMs rated at 6400 MT/s with CL52 latency and 1.1V operation. It is built for the Supermicro X14SDV-42C-SP3F motherboard and uses the registered ECC 4Rx4 configuration that board requires.

Capacity and Headroom

Four populated slots deliver 512GB of registered ECC memory, letting the memory controller address the full amount at the rated 6400 MT/s speed. The 4Rx4 organisation supports maximum density per channel, so the kit reaches the platform limit without downclocking.

Thermals and Power

Modules run at 1.1V without heat spreaders, relying on the server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw steady across all four slots during sustained workloads.

주요 특징

  • Massive 512 GB capacity from four 128 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation matches the board's memory-controller requirements exactly
  • Validated for Supermicro X14SDV-42C-SP3F with 288-pin RDIMM form factor

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will this 512GB DDR5 6400 kit work with the existing DIMMs already installed in my Supermicro X14SDV-42C-SP3F?

This kit is validated for the Supermicro X14SDV-42C-SP3F at DDR5 6400 with 4Rx4 registered ECC at 1.1V CL52. Mixing ranks or speeds can prevent full-speed operation; consult the board manual for approved population rules before adding to existing modules.

How can I confirm the kit is running at DDR5 6400 CL52 1.1V with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to verify each 128GB module shows 6400 MT/s, CL52, 1.1V, registered ECC, and 4Rx4 organisation. The POST memory test should report the full 512GB without errors.

What comes in the box and do I need any extra brackets or cables for the Supermicro X14SDV-42C-SP3F?

The package contains four 128GB 288-pin DDR5 RDIMMs — no heat spreaders, brackets, cables or tools are included. The motherboard uses standard RDIMM slots so no additional hardware is required for installation.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.