Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80mm square frame fan with 3-pin connector

OEM Industries

OEM Industries AD0812XB-A73GL 80mm 12V 0.55A 3-pin ball-bearing fan

SKU CH-FSCY-6ECPJ

80 mm ball-bearing case fan runs on 12 V, draws 0.55 A and connects via a 3-pin header

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball-bearing design extends operational lifespan
  • 12 V 0.55 A rating matches standard chassis headers
  • 80 mm frame fits common server and inverter cases
  • Three-pin connector enables speed monitoring by motherboard
  • Black finish blends with professional build aesthetics

80mm 12V Ball-Bearing Cooling Fan

This 80mm case fan from OEM Industries runs on 12 volts and draws 0.55 amps through a three-pin power connector. It uses a ball-bearing design and has no LED lighting. The unit is supplied new as a standalone fan for chassis or server airflow.

Fits Standard 8025 Mounts With Three-Pin Power

The frame matches the common 80 by 25 millimetre footprint used in many server and inverter enclosures. A three-pin header supplies power and speed reporting without needing a separate controller. No additional brackets or adapters are mentioned in the specifications.

Suits Builders Replacing An 80mm Three-Pin Unit

It suits technicians who need a direct replacement for an 80mm ball-bearing fan with a three-pin connector. Buyers who require PWM speed control, LED illumination, larger frame sizes or different voltage ratings should look at other models.

Puncte forte

  • Ball-bearing design extends operational lifespan
  • 12 V 0.55 A rating matches standard chassis headers
  • 80 mm frame fits common server and inverter cases
  • Three-pin connector enables speed monitoring by motherboard
  • Black finish blends with professional build aesthetics

Specificații

ModelAD0812XB-A73GL
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

What is the maximum current the 12 V ball-bearing motor will draw under continuous load?

The fan is rated at 0.55 A on a 12 V supply, so sustained operation will not exceed that figure.

How much acoustic and thermal output should I expect from the 80 mm ball-bearing unit running 24/7?

Ball bearings typically produce a moderate whir at full voltage; with no LED or PWM control the noise and heat remain constant during all-day use.

Which motherboard header or adapter is required to power the 3-pin connector on this 8025 frame?

A standard 12 V three-pin fan header supplies both power and tachometer signal; no extra controller or Molex adapter is needed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.