Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black 80mm square frame fan with 3-pin connector

OEM Industries

OEM Industries AD0812XB-A73GL 80mm 12V 0.55A 3-pin ball-bearing fan

SKU CH-FSCY-6ECPJ

80 mm ball-bearing case fan runs on 12 V, draws 0.55 A and connects via a 3-pin header

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Ball-bearing design extends operational lifespan
  • 12 V 0.55 A rating matches standard chassis headers
  • 80 mm frame fits common server and inverter cases
  • Three-pin connector enables speed monitoring by motherboard
  • Black finish blends with professional build aesthetics

80mm 12V Ball-Bearing Cooling Fan

This 80mm case fan from OEM Industries runs on 12 volts and draws 0.55 amps through a three-pin power connector. It uses a ball-bearing design and has no LED lighting. The unit is supplied new as a standalone fan for chassis or server airflow.

Fits Standard 8025 Mounts With Three-Pin Power

The frame matches the common 80 by 25 millimetre footprint used in many server and inverter enclosures. A three-pin header supplies power and speed reporting without needing a separate controller. No additional brackets or adapters are mentioned in the specifications.

Suits Builders Replacing An 80mm Three-Pin Unit

It suits technicians who need a direct replacement for an 80mm ball-bearing fan with a three-pin connector. Buyers who require PWM speed control, LED illumination, larger frame sizes or different voltage ratings should look at other models.

Pluspunten

  • Ball-bearing design extends operational lifespan
  • 12 V 0.55 A rating matches standard chassis headers
  • 80 mm frame fits common server and inverter cases
  • Three-pin connector enables speed monitoring by motherboard
  • Black finish blends with professional build aesthetics

Specificaties

ModelAD0812XB-A73GL
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vragen over dit artikel

What is the maximum current the 12 V ball-bearing motor will draw under continuous load?

The fan is rated at 0.55 A on a 12 V supply, so sustained operation will not exceed that figure.

How much acoustic and thermal output should I expect from the 80 mm ball-bearing unit running 24/7?

Ball bearings typically produce a moderate whir at full voltage; with no LED or PWM control the noise and heat remain constant during all-day use.

Which motherboard header or adapter is required to power the 3-pin connector on this 8025 frame?

A standard 12 V three-pin fan header supplies both power and tachometer signal; no extra controller or Molex adapter is needed.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.