Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black square fan thirty by ten millimetres three pin connector

OEM Industries

OEM Industries C3010S12L 30x10mm 12V .07A 3-pin fan

SKU CH-XEJ6-YP27N

A 30 mm square fan with sleeve bearing, 12 V .07 A draw and a 3-pin connector for compact cooling

  • ColorBlack
  • TypeFan only
  • Fan Size30mm
  • Bearing TypeSleeve Bearing
  • Power Connector3 Pin
  • LEDNo
  • Compact 30 x 10 mm frame fits tight spaces
  • 12 V 0.07 A draws minimal power
  • 3-pin connector enables speed monitoring
  • Sleeve bearing keeps noise low
  • Designed for HDD and small-form-factor cooling

Square 30 mm fan for tight spaces

The OEM Industries C3010S12L is a compact square cooler measuring 30 by 10 mm, designed for small-form-factor builds and component-level cooling where a standard frame will not fit. It targets system integrators and hobbyists who need airflow in confined areas such as chipset heatsinks or drive cages.

12 V 0.07 A three-pin power requirement

The single specification that determines compatibility is the 12 V, 0.07 A draw on a standard three-pin connector. The header must supply 12 volts and the motherboard or controller must accept a three-wire fan without PWM control; otherwise the fan will not start or report speed correctly.

Sleeve bearing runs quietly at steady speed

Under sustained load the sleeve bearing maintains consistent rotation without the rattle that can develop in ball-bearing units over time. The low current draw keeps heat generation minimal, so the fan reaches a stable acoustic level quickly and holds it throughout continuous operation.

Puncte forte

  • Compact 30 x 10 mm frame fits tight spaces
  • 12 V 0.07 A draws minimal power
  • 3-pin connector enables speed monitoring
  • Sleeve bearing keeps noise low
  • Designed for HDD and small-form-factor cooling

Specificații

ModelC3010S12L
ColorBlack
TypeFan only
Fan Size30mm
Bearing TypeSleeve Bearing
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How much power does the 12 V .07 A rating actually draw in a live system?

The fan draws 0.07 amps at 12 volts, which is a very low current for a 30 mm cooler.

What does the 3-pin connector limit compared with a 4-pin PWM header?

A 3-pin header controls speed by varying voltage, so the minimum speed is higher than with PWM and there is no duty-cycle signal.

Will the 30 mm square frame and 10 mm thickness fit my drive bracket or chassis slot?

The cooler measures 30 mm by 30 mm and is 10 mm thick, so it matches standard 3010 mounting holes and slim drive bays.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.