OEM Industries
OEM Industries C3010S12L 30x10mm 12V .07A 3-pin fan
A 30 mm square fan with sleeve bearing, 12 V .07 A draw and a 3-pin connector for compact cooling
- ColorBlack
- TypeFan only
- Fan Size30mm
- Bearing TypeSleeve Bearing
- Power Connector3 Pin
- LEDNo
- Compact 30 x 10 mm frame fits tight spaces
- 12 V 0.07 A draws minimal power
- 3-pin connector enables speed monitoring
- Sleeve bearing keeps noise low
- Designed for HDD and small-form-factor cooling
Square 30 mm fan for tight spaces
The OEM Industries C3010S12L is a compact square cooler measuring 30 by 10 mm, designed for small-form-factor builds and component-level cooling where a standard frame will not fit. It targets system integrators and hobbyists who need airflow in confined areas such as chipset heatsinks or drive cages.
12 V 0.07 A three-pin power requirement
The single specification that determines compatibility is the 12 V, 0.07 A draw on a standard three-pin connector. The header must supply 12 volts and the motherboard or controller must accept a three-wire fan without PWM control; otherwise the fan will not start or report speed correctly.
Sleeve bearing runs quietly at steady speed
Under sustained load the sleeve bearing maintains consistent rotation without the rattle that can develop in ball-bearing units over time. The low current draw keeps heat generation minimal, so the fan reaches a stable acoustic level quickly and holds it throughout continuous operation.
주요 특징
- Compact 30 x 10 mm frame fits tight spaces
- 12 V 0.07 A draws minimal power
- 3-pin connector enables speed monitoring
- Sleeve bearing keeps noise low
- Designed for HDD and small-form-factor cooling
사양
| Model | C3010S12L |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 30mm |
| Bearing Type | Sleeve Bearing |
| Power Connector | 3 Pin |
| LED | No |
이 상품에 대한 질문
How much power does the 12 V .07 A rating actually draw in a live system?
The fan draws 0.07 amps at 12 volts, which is a very low current for a 30 mm cooler.
What does the 3-pin connector limit compared with a 4-pin PWM header?
A 3-pin header controls speed by varying voltage, so the minimum speed is higher than with PWM and there is no duty-cycle signal.
Will the 30 mm square frame and 10 mm thickness fit my drive bracket or chassis slot?
The cooler measures 30 mm by 30 mm and is 10 mm thick, so it matches standard 3010 mounting holes and slim drive bays.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001056BTC
재고 있음