Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 80mm square fan with 4-pin connector

OEM Industries

OEM Industries F128025DU 80mm 4-pin CPU cooler

SKU CH-JRY2-69D05

An 80 mm square fan with 4-pin PWM control, ball bearing and 12 V .4 A rating for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Precise speed control with 4-pin PWM connector
  • Reliable long-life operation using ball bearing design
  • Fits tight builds with compact 80 mm frame
  • Efficient 12 V 0.4 A power draw
  • Clean look with black finish and no LED

Compact 80 mm 4-pin CPU fan

The OEM Industries F128025DU is an 80 mm square fan designed for direct CPU cooler mounting. It suits small-form-factor builds or replacement cooling where an 8025 frame fits. The four-pin connector enables PWM speed control from the motherboard. No LED lighting is included.

Fits tight layouts with standard mounting

The 80 mm by 25 mm footprint matches common low-profile heatsink brackets. Ball-bearing construction supports continuous operation at 12 V and 0.4 A draw. Four-wire control frees the builder from fixed-voltage headers and allows automatic fan-curve response. No additional brackets or adapters are mentioned in the specifications.

Ships as a bare fan unit

Only the F128025DU fan itself is supplied; no mounting screws, thermal compound or software utilities are listed. The package assumes the installer already has compatible retention hardware for the target socket. Buyers needing a complete cooler kit with heatsink and fixings will need to source those separately.

Puncte forte

  • Precise speed control with 4-pin PWM connector
  • Reliable long-life operation using ball bearing design
  • Fits tight builds with compact 80 mm frame
  • Efficient 12 V 0.4 A power draw
  • Clean look with black finish and no LED

Specificații

ModelF128025DU
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Întrebări despre acest articol

How much current does the 12 V 4-pin motor draw under load?

The fan is rated at 12 V 0.4 A, so the motor will pull up to 0.4 A when running at full speed.

What noise and heat should I expect from the ball-bearing 80 mm fan running continuously?

Ball bearings run warmer and louder than fluid-dynamic types; expect a noticeable hum and measurable case-temperature rise during all-day operation.

Which motherboard header is required for the 4-wire PWM connector on this cooler?

A standard 4-pin PWM CPU fan header on the motherboard is needed for speed control and monitoring.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.