Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black 40mm square fan, 10mm thick, three-pin connector

OEM Industries

OEM Industries FD1240-D2233A 40mm CPU cooler

SKU CH-DR4G-WZX9V MPN FD1240-D2233A

40 mm ball-bearing fan runs at 12 V and 0.11 A through a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40mm frame fits tight builds
  • Ball bearing ensures durable, quiet operation
  • 12V 0.11A draw keeps power use low
  • 3-pin connector enables speed monitoring
  • Plain black finish suits any chassis style

Compact 40mm form factor

The OEM Industries FD1240-D2233A is a 40 by 40 by 10 millimetre axial fan designed for tight chassis where a full-size cooler cannot fit. It draws 0.11 amps at 12 volts through a standard three-pin connector and uses a ball bearing for durable rotation. Black frame and blades keep the appearance neutral for any build.

Sustained low-speed operation

Ball-bearing construction maintains consistent RPM during continuous duty without the wear pattern seen in sleeve alternatives. The modest current draw produces a steady airflow suited to component-level cooling rather than high-wattage processor loads. Acoustic output remains proportional to the low rotational speed required for small-form-factor enclosures.

Three-pin voltage control limit

The three-pin interface adjusts speed by varying supply voltage, so minimum RPM is bounded by the motherboard's lowest voltage step. Pulse-width modulation is not available, preventing software-defined curves below that hardware floor. Builders needing finer low-speed granularity or automated profiles must verify board capabilities before purchase.

Puncte forte

  • Compact 40mm frame fits tight builds
  • Ball bearing ensures durable, quiet operation
  • 12V 0.11A draw keeps power use low
  • 3-pin connector enables speed monitoring
  • Plain black finish suits any chassis style

Specificații

ModelFD1240-D2233A
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How loud and warm does the 40mm ball-bearing fan run at 12V 0.11A during continuous operation?

The 40×10mm ball-bearing fan draws 0.11A at 12V, so power draw is low; ball bearings typically run quieter and cooler than sleeve types over long periods.

What connector and voltage must my motherboard or fan header provide for this 3-pin 12V cooler?

It uses a standard 3-pin 12V connector; your board needs a 3-pin fan header supplying 12V to power and report speed.

Will the 40×10mm footprint fit alongside taller RAM or a legacy socket retention bracket I already have?

At 40×40×10mm the unit is very compact, leaving ample clearance for tall memory modules and older socket brackets.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.