Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Small black 40mm square fan, 10mm thick, three-pin connector

OEM Industries

OEM Industries FD1240-D2233A 40mm CPU cooler

SKU CH-DR4G-WZX9V MPN FD1240-D2233A

40 mm ball-bearing fan runs at 12 V and 0.11 A through a 3-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40mm frame fits tight builds
  • Ball bearing ensures durable, quiet operation
  • 12V 0.11A draw keeps power use low
  • 3-pin connector enables speed monitoring
  • Plain black finish suits any chassis style

Compact 40mm form factor

The OEM Industries FD1240-D2233A is a 40 by 40 by 10 millimetre axial fan designed for tight chassis where a full-size cooler cannot fit. It draws 0.11 amps at 12 volts through a standard three-pin connector and uses a ball bearing for durable rotation. Black frame and blades keep the appearance neutral for any build.

Sustained low-speed operation

Ball-bearing construction maintains consistent RPM during continuous duty without the wear pattern seen in sleeve alternatives. The modest current draw produces a steady airflow suited to component-level cooling rather than high-wattage processor loads. Acoustic output remains proportional to the low rotational speed required for small-form-factor enclosures.

Three-pin voltage control limit

The three-pin interface adjusts speed by varying supply voltage, so minimum RPM is bounded by the motherboard's lowest voltage step. Pulse-width modulation is not available, preventing software-defined curves below that hardware floor. Builders needing finer low-speed granularity or automated profiles must verify board capabilities before purchase.

Pluspunten

  • Compact 40mm frame fits tight builds
  • Ball bearing ensures durable, quiet operation
  • 12V 0.11A draw keeps power use low
  • 3-pin connector enables speed monitoring
  • Plain black finish suits any chassis style

Specificaties

ModelFD1240-D2233A
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Vragen over dit artikel

How loud and warm does the 40mm ball-bearing fan run at 12V 0.11A during continuous operation?

The 40×10mm ball-bearing fan draws 0.11A at 12V, so power draw is low; ball bearings typically run quieter and cooler than sleeve types over long periods.

What connector and voltage must my motherboard or fan header provide for this 3-pin 12V cooler?

It uses a standard 3-pin 12V connector; your board needs a 3-pin fan header supplying 12V to power and report speed.

Will the 40×10mm footprint fit alongside taller RAM or a legacy socket retention bracket I already have?

At 40×40×10mm the unit is very compact, leaving ample clearance for tall memory modules and older socket brackets.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.