Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60mm square CPU cooling fan with ball bearing

OEM Industries

OEM Industries FD246025HB 60mm 24V 0.09A 2-wire CPU cooler

SKU CH-GPZW-TSHEP

60 mm case fan with ball bearing, 24 V 0.09 A two-wire power and 25 to 30 dBA noise

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • LEDNo
  • 24 V power draw keeps system power low
  • 60 mm frame fits compact cases and tight clearances
  • Ball bearing design extends operational lifespan
  • 25 to 30 dBA output runs quietly under load
  • 25 to 30 CFM airflow cools CPU effectively

Compact 60 mm 24 V fan for tight builds

This 60 mm square frame fits the 6025 form factor and runs on a 24 V supply drawing 0.09 A. The two-wire power connector delivers simple on-off control without PWM signalling. It is intended for system integrators and hobbyists who need a basic airflow device in confined spaces.

Ball-bearing construction with two-wire simplicity

Dual ball bearings support continuous rotation at the rated 25 to 30 dBA acoustic range and 25 to 30 cfm airflow. The black plastic frame mounts with standard 60 mm screw holes, and the absence of LEDs keeps the unit visually neutral. Two-wire wiring means speed is fixed unless an external voltage regulator is added.

Replaces worn 60 mm case or cooler fans

The FD246025HB serves as a direct swap for failed 60 mm fans in legacy coolers, industrial enclosures or compact chassis. The upgrade is worthwhile when the original sleeve-bearing unit has become noisy or seized, and a 24 V rail is already present. Buyers who need PWM speed control or a three- or four-pin header should look elsewhere.

Puncte forte

  • 24 V power draw keeps system power low
  • 60 mm frame fits compact cases and tight clearances
  • Ball bearing design extends operational lifespan
  • 25 to 30 dBA output runs quietly under load
  • 25 to 30 CFM airflow cools CPU effectively

Specificații

ModelFD246025HB
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector2 Wires
LEDNo

Întrebări despre acest articol

What does the 2-wire power connector mean for speed control on the FD246025HB?

The 2-wire connector supplies fixed 24 V power, so the fan runs at full speed continuously with no PWM or voltage regulation.

How much clearance does the 60 mm by 25 mm frame need for mounting?

It requires a 60 mm square cut-out and 25 mm depth, matching standard 6025 mounting holes.

How do you connect the two wires correctly during installation?

Connect the red wire to 24 V positive and the black wire to ground; reversing them will prevent the fan from spinning.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.