Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black square cooling fan 25 by 6 mm 5 volt 0.6 watt two wire

OEM Industries

OEM Industries KD0502PEB2-8 25x6 mm 5 V 0.6 W 2-wire fan

SKU CH-ZEKJ-FE2AG

A 25 × 6 mm square cooling fan with ball bearing, 5 V 0.6 W power and a 2-wire 3-pin connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 25 × 6 mm footprint fits tight spaces
  • Ball bearing ensures long-lasting, quiet operation
  • Low 5 V / 0.6 W draw keeps power use minimal
  • Simple 2-wire design eases installation
  • No LED lighting for distraction-free builds

Compact 25 mm square fan

The OEM Industries KD0502PEB2-8 is a 25 by 6 mm square cooling fan that runs on 5 V and draws 0.6 W. It uses a two-wire connection and a ball bearing for smooth rotation. The black frame suits tight spaces in small form-factor builds or embedded boards.

Steady low-power airflow

At its rated voltage the fan delivers continuous airflow without the current spikes seen in higher-wattage models. The ball bearing maintains consistent speed during long operating periods. Low power draw keeps heat contribution minimal inside sealed enclosures.

Two-wire 5 V power requirement

This unit needs a 5 V source that can supply 0.6 W through a two-pin header. Builders using three-pin or four-pin fan headers must adapt the connector. Systems without a 5 V fan header cannot power the fan directly.

Puncte forte

  • Compact 25 × 6 mm footprint fits tight spaces
  • Ball bearing ensures long-lasting, quiet operation
  • Low 5 V / 0.6 W draw keeps power use minimal
  • Simple 2-wire design eases installation
  • No LED lighting for distraction-free builds

Specificații

ModelKD0502PEB2-8
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How much heat and power does the 5 V 0.6 W KD0502PEB2-8 fan add when running continuously?

The fan is rated at 0.6 W on a 5 V supply, so its continuous power draw and heat output are very low.

What connector and voltage must my board or controller provide for the 2-wire KD0502PEB2-8?

It needs a 5 V source and uses a 2-pin lead; the listing also notes a 3-pin connector, so check which header your board exposes.

Will the 25 mm square KD0502PEB2-8 fit the mounting holes on my legacy 25 mm fan bracket?

Yes — the frame is 25 mm on a side, matching the standard 25 mm square footprint used on many older brackets.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.